Machinery Consultants Inc            This graphic means item confirmed as in stock

1390 W 200 S Salt Lake City UT 84104-1810
Tel: 801-531-9500 Fax: 801-531-9555
Email: cory@machineryconsultants.com
Web: www.machineryconsultants.com

0L3000 LATHES, ENGINE
7" x 20" cc, Monarch EE, Sabina Solid State Drive, Hard Bed, Tooling, 4,000 RPM [4706]
13" x 20" cc, Monarch, Solid State Inverter Variable Speed Drive, Camlock D-1-3, 1 1/2 spin bore, 2MT tailstock taper, 3HP, DRO, Tooling [8686]
13 1/4" x 24" cc, Monarch EE, Solid State Inverter Variable Speed, 7 1/4 swing over slide, Camlock D1-3 nose, 2MT, 4" Tailstock Trav. 5HP, [8689]
13 1/2" x 24" cc, Monarch EE, 7 1/4 swing over slide, D-1-3 camlock 1 1/2 2250RPM, 2HP, 2 Axis Newall DRO, Flexbar gaurd, Frequ Invert drive [8075]
15" x 10" cc, Monarch, Heavy Duty, 15 5x30, Toolroom Lathe, Model 60, D16 nose, 3MT tailstock, 5HP
18" x 80" cc, Polamco, Gap Lathe, D16 Nose, #5 MT, 1600 RPM, 4 Jaw Chuck, Tool Block, 5 Holders, Taper Att, 18 inch Face Plate, Low Hours [9652]
19" x 30" cc, Lodge & Shipley, L1 Spind Nose, 2" Bore, #6 MT, #4 Tailstock, 18" Bed, 15 HP, 2000 RPM, Low hrs, Great condition [9635]
19" x 32" cc, American, 19.25x32, Tool Room Zip Shift, D1.6 Nose, 2 Bore, 1630 RPM, 15HP, Taper Att w/Clamp, Machine Light, Chip Pan, Mic Stop [9604]
23" x 72" cc, Axelson, HD lathe, 20x72, D1-8 nose, 2.25 bore,5MT, 22bed, 20HP, 12 3 jaw chk, QC tool pst, 2spd tailstock [557]
23" x 120" cc, American, Very Limited Use Heavy Duty Pacemaker Engine Lathe, 1000 RPM, L2, #4, 10HP, 10" 3 Jaw, 18" 4 Jaw, Hardened Ways [8698]
24" x 50" cc, Monarch, [478]
24" x 100" cc, Leblond, 9-800RPM, 20HP, L-2, 18" 4 jaw chuck, steady rest, 14" over slide, very good, see video [5570]
27" x 240" cc, American,Pacemaker, D1-8, 18-1200 RPM, #5, 16" 4 Jaw, Hardened Ways, 4 Way Power Rapid Traverse on X & Y [8699]
27 1/2" x 144" cc, Monarch, D1.8 Nose, 2.25 Bore, 5MT, 22 Bed, 600 RPM, 25 HP, 3 Jaw Chuck, Taper Att, Steady Rest, Tool Block, Runs Great [9651]
31" x 120" cc, Leblond, 31x120NI, 19.5 swing over slide, 44swing 17 gap, 400RPM. 6MT, 20HP, 4 jaw, steady rst. 4way tool block [597]

0L3504 LATHES, GAP, REMOVABLE GAP
22"/28" x 105"/105"cc, Tarnow, '72, 35-1800RPM, inch/mm, D1-6, 10HP, 16" 4 jaw chuck, steady rests, very good, YouTube video [8576]

0L3524 LATHES, GAP, SLIDING BED
18"/37" x 48"/67"cc, Century, USA, #B-40, 25-1000RPM, 5HP, L-1, 12" chuck, taper attachment, fine shape, Youtube Video [5578]
20"/44" x 36"/54"cc, Standard Modern, Low Hr, 19/36x54, D16nose, tailstk tap. #4, 14" bed, 7.5HP, 5,500 Lbs, 3Jaw, 22" face plate w/ t-slots, taper att.w/ clp [9663]

0L6200 LATHES, TURRET, AUTOMATIC
No. 3, Warner & Swasey, Square Hd, Preselect, a6 nose, Turret 6 slide, [9665]

0L6249 LATHES, TURRET, RAM TYPE
No. 3, Warner & Swasey, M4630 Square head, A6 nose, 2 bore, 2262 RPM, threading w/ qc box, bar feed, 3 jaw chuck, excellent condition [9655]