GCH Machinery Division            This graphic means item confirmed as in stock

13301 E 8 Mile Rd Warren MI 48089-3218
Tel: 586-771-1500 Fax: 586-771-5958
Email: gch1@voyager.net
Web: www.grindersclearinghouse.com/

0F1650 FINISHING MACHINES
No. SM460, Sufina, 8 Heads, Adj Rolls, Controls, 1990 (2)

0G1004 GEAR GRINDERS
No. AZA, Reishauer, 13" Dia GW, 4-48 DP, Crowning, Full Auto Dresser, 1981 (2)

0G1890 GEAR SPLINE ROLLERS
No. 3225, Michigan roto-F10, 24" back, 1-50" max dia., 3.65" face, excel, 1970

0G3950 GRINDERS, BEARING RACE
No. 1, Cin-Cinex, CNC Controls, Auto Load, Auto Trving, Chuck, Exc, 1990 (3)
No. 1 & 2, Cincinnati, Microcentric, Loader, Radius & Prof. Truing, Auto. Feed, LR/DE/MD, 30 In Stock
No. 1CF90, Heald, Bore Grinder, 4-1/2" Cap., Auto. Feed, Auto. Truing, (6) 1966-1970
No. 1CF91, Heald, Track Grinder, 4-1/2" Cap., Radius Dresser, Auto. Load, Shoe Mag. Head, (5) 1966-1970
No. B, Bryant, Miniature, Spindle, Work Head, Dresser, Auto. Cycle, 1985
No. C, Bryant, Radius Track Grinders, Radius Dresser, Excellent, 1965;_5

0G4054 GRINDERS, BROACH
6" x 48" cc, Thompson, Flats, Mag. Chuck, Runs Good (2)

0G4306 GRINDERS, CENTERLESS
No. 107-4, Cincinnati, Centerless, Thru Feed/Infeed, 16" x 4" G.W., 7 HP, Hyd. Truing, Exc., 1955-1968
No. 14R, Landis, Thru Feed, Hyd. Truing, Comp. Electrics, From Service, 20" x 12" G.W., 1970's,_2
No. 2, Cincinnati, Model EA, Hyd. Profile Truing, Infeed & Thru Feed, 1941-1947, 10 In Stock
No. 2 Cincinnati Model LO, Hyd. Profile, 1956, from Running Service_7
No. 20M, Cincinnati, Ctrls., Have 2 Remanufactured In House At All Times, Can Tool, 1 Yr. Parts Warranty
No. 220-8, Cincinnati, Centuramic, 24" Wheel, Thru Feed, Outboard Support, R.W., Excellent, 1971
No. 220-8, Cincinnati, 20"/24" G.W., Infeed/Thru Feed, Several Of Each In House, Rebuilt
No. 220-8, Cincinnati,, Cin. Ctrls, 24" G.W., Rebuilt 2002, Ready to Go
No. 220-8RK, Cincinnati, 24 x 10 GW, 20 HP, Servo Auto Dia Adv & Traverse, Exc, 1992
No. 230-10, Cincinnati, Twin Gap, 24" x 10" G.W., Thru Feed, Hyd. Truing Both Sides, 1981
No. 230-12 AE, Cincinnati, Twin Grip, 24 x 12 GW, Servo Traverse on Dressers, 30 HP, Autocomp, 1981
No. 325-12, Cincinnati, 24" x 12" G.W., Hyd. Truing, Outboard Support, Exc. Cond., 1975 (3)
No. 330-15, Cincinnati, 24" x 15" G.W., Outboard Support, Infeed w/Comp., Exc. Tool, 1971
No. 340-20, Cincinnati, Twin Grip, 24" x 20" G.W., 40 HP, Auto. Comp., Exc. Tools, Warranty, 1983 (2)
No. 340-20, Cincinnati, Twin Grip, 40 HP, Auto. Diamond Advance, 24" x 20" G.W.,Exc. Tool, Warranty, 1974
No. 350-20AE, Cincinnati, Twin Grip, Auto. Truing, Auto. Comp., 1986 (3)
No. 350-20RK, Cincinnati, Electronic Controlled, Servo Comp., 2001
No. 3CH, Bryant, Ex-Cell-O, Twin Grip Style, Hyd. Truing, Comp., From Service, 1980
No. 3EA, Cincinnati, 24" x 10" G.W., Hyd. Truing, 25 HP, 1 Yr. Warranty, Remfd. 2004
No. 430-12, Cincinnati, OBS ON RW Spindle, 24 x 12 GW
No. 440-20, Cincinnati, Twin Grip, Comp., Hyd. Truing, Auto. Diamond Advance, Nice Tool, 1971/1980 (2)
No. 4EA, Cincinnati, 24 x 10 GW, Hyd Trving Both Sides, 25 HP, Nice Tool
No. KC-200, Koyo, 1990 Thrufed, 8" wode wheels, capacity 0.06"x4.72"
No. KC-300, Koyo, 1990, Twin Grip, 12" Wide Wheels, Capacity 0.06" - 4.72"
No. KC-500H, Koyo, 1986, Twin Grip, 20" Wide Wheels, Capacity 0.12" - 4.72"
No. Viking, 8" CNC 200, Cincinnati, Twin Grip, 16 x 8 GW, CNC Wheel Trning, Exc Tool, 1996
Cincinnati, Cinco 15, 20"/24" G.W., Hyd. Truing, Thru Feed, Exc., 1966-1985 (2)
Unison Dedtru, w/Harig Base, Pope Spindle, Auto. Cycle, Dwell (2)

0G4400 GRINDERS, CHUCKING
No. 1 Cincinnati Micro-Centric, w/Dresser, 1964
No. 1, Cincinnati, Chucker, Crush Roll Dresser, Auto. Loading, Excellent, 1969
No. 2, Cincinnati, Microcentric, Radius & Prof. Truing, 24" G.W., Nice, 1960's-1970's
No. 2, Cincinnati, Model MD, Microcentric, Shoe Mag. Drive, Loader, Auto. Truing, 1985

0G4526 GRINDERS, CRANKSHAFT
Landis Mod. 3L, Full CNC, 15" x 595" Work Envelope, Marposs, New 2003, Excellent

0G4532 GRINDERS, CRUSH
Sheffield, No. 10, Crushform, Delpark Filtration, Excellent
Sheffield, No. 187B, 24" x 12" G.W., Dresser, 30 HP, Comp., 1975

0G4601 GRINDERS, CYLINDRICAL, N/C & CNC
10" x 20", 2R Landis CNC, 24" G.W., Rotary Trving, 15 HP, Gauging, 1990 (2)
Unison, No. 1000, G & L PC Controls, Exc., 1986

0G4706 GRINDERS, CYLINDRICAL
6" x 18", Cincinnati, No. Plain,, Auto Feed, 24" G.W., Hydraulic Table, Nice Tool! [003187]
6" x 18", Cincinnati, No. R57, Deadhead, 14" GW, Exc, 1973
6" x 18", Landis, No. 1R, Plunge, Pick Feed, Auto. Truing, 16" G.W., Exc., 1980 (2)
6" x 18", Norton, No. CTU, Plunge, Hyd. Table, Osc. Spindle, Exc., Gov't, 1950
6" x 18", Warner & Swasey, No. C5, Hyd. Table Plunge, Auto. Truing, 1980';_2
6" x 30", Cincinnati, No. Plain,, Auto Feed, Head and Tailstock, 24" G.W., Ready to Go!! [003187]
6" x 30", Norton, No. CTU, Plunge, Hyd Table, 24" GW, Rebuilt 2005
10" x 18" Cincinnati, Plunge, Auto. Balance, Oscillation, 30" Wheel, Very Nice, 1953
10" x 18", Warner & Swasey, No. C5, Plunge, Table Travel, 1974
10" x 20", 2R Landis CNC, 24" G.W., Rotary Trving, 15 HP, Gauging, 1990 (2)
10" x 24", Landis, No. 3R, 30" x 3" G.W., Plunge, Trav. Feed, V.S. Head, Trav. Table, Very Nice, 1970
10" x 24", Parker-Majestic, Power Table, 3-Jaw, 1 HP, Nice
10" x 30" Cincinnati Type L, Plunge, Spindle Recip., Hyd. Dresser, Fine & Course Fd., 1964, Excellent
10" x 31", Cincinnati, No. R78, Plunge, Live/Dead Head, 16" G.W., Exc., 1977
10" x 36", Norton, No. CTU, 30" x 4" G.W., Osc. Spdl., Plunge, Tarry, Exc., Gov't, 1954;_2
10" x 36", Norton, No. CTU,, 30" x 8" G.W., Plunge Feed, Above Wheel Truing, 15 H.P., Excellent Tool! [003187]
10" x 48", Cincinnati, No. 370DA, Plunge, Auto. Truing, 30" G.W., Hyd. Table, EC Controls, 1974
10" x 48" Norton Type CTU, Semi-Auto., Plunge, Hyd. Travel, Inspect under Power
10" x 72", Cincinnati, Auto. Feeds, Hyd. Table, 30" G.W., Nice Tool, 1970
10"/14" x 120", Landis, No. Type CH, Dead/Live Headstock, Hyd Table, 30" GW, 1959
14" x 24", Norton, No. LC5, Above Truing, Auto Feed, Live Ctr., Exc., 1971
14" x 36", Cincinnati, No. 370DA, Auto. Plunge, EC Ctrls., 24" x 4" G.W., Hyd. Tbl., Exc. Tools, 1981
14" x 36", Norton, No. LC5, 24" G.W., Hyd. Table, Plunge, Auto. Truing, Rebuilt 2000
14" x 48", Landis, No. 4R, Plunge, Hyd. Table Travel, Truform Dresser, 1971
14" x 48" Norton Type LCTU, Live Center Headstock, Wheel Guard Dress, Plunge, 1963
14" x 60", Cincinnati, No. 470EC, 2-Axis Step, Auto. Truing, 30" G.W., Gauging, 1978, Exc.
14" x 72", Landis, No. R Series,, 30 x 5 G.W., Plunge, Tarry, Nice Tool!! 1965 [003187]
14" x 96", Norton, No. C, Hyd Table, 30" GW, 1952
16" x 96", Cincinnati, Hyd. Table, Pick Feed, V.S. Headstock, From Running Service

0G4750 GRINDERS, CYLINDRICAL
6" x 18", Landis, No. 2R, Tru-Form Dresser, Marposs Gage Dia. & Flag., 1976
6" x 18", Warner & Swasey, 30] Angle, Plunge Feed, Hyd. Table, Duplitro Truing, Comp., Exc., 1978
10" x 18" Cincinnati, Plunge, Auto. Table Position, Wheel Dress., Comp.
10" x 18", Landis, No. 2R, 24" Dia. Wheel, Truform Dresser, Microtronic Feed, Excellent, 1976
10" x 18" Norton No. CV5, Duplitru Dresser, Allen-Bradley Controller, 30" Wheel, 1981, Excellent_3
10" x 20", 2R Landis CNC, 2-Axis, Auto Trving, Chuck, Gauge, Exc., 1990 (2)
10" x 20", Landis, No. 2R, Microtronic Controls, Gaging, Auto Trving, Exc, 1978
10" x 24", Landis, No. 3R, Tru-Form Control Gage Dia. & Side Auto. Quill Advance, 1971
10" x 36" Norton No. CV4, Wheel Guard Dress, 30" Wheel, Plunge Feed, Excellent_2
10" x 36" Norton No. CV5, Above Whl. Dress, 1967, Full 1 Yr. Manufacturer's Tolerance Guarantee
14" x 40", Warner & Swasey, No. ACC, Stepmaster, Auto. Feed, Truing, Exc. Cond., 1985
14" x 60", Cincinnati, No. EC, 30" G.W., Auto. Feed, Auto. Truing, Comp., Very Nice, 1982
14" x 72", Warner & Swasey, No. LCV5, Auto. Truing, 20 HP, Plunge, 1970's
18" x 48", Landis, No. 4R, Microtronic Feed, Head/Tailstock, Auto. Truing, Exc., 1973
24" x 36", Landis, Model 4R, Microtronic Controls, Auto. Behind Truing, From Aircraft, 1975
24" x 120", Norton, No. LCV4, 30" x 4" G.W., Above Wheel Truing, Hyd. Table Trav., Plunge, 1966

0G4765 GRINDERS, CYLINDRICAL
10" x 20", 2R Landis CNC, 24" G.W., Rotary Trving, 15 HP, Gauging, 1990 (2)

0G4800 GRINDERS, CYLINDRICAL
10" x 20", Brown & Sharpe, No. 1, I.D. Attachment, Hyd. Table, 10" G.W., Swivel Head, Exc., From Boeing
10"x20", Landis, No. 1R, 1-2MT, 16" GW, Plunge, Pick Feed, Auto. Truing, Gaging, Excellent, 1969-1980;_4
10" x 24", Landis, No. 2RU, I.D. Att., 14" G.W., Pick Feed, Tarry, Rebuilt 2000, Immed. Del.
10" x 31", Cincinnati, No. R77, I.D. Att., Live-Dead, Head, Pick Feed, 16" G.W., Exc., 1978
12" x 36", Cincinnati, Univ., I.D. Att., Pick Feed, Hyd., 14" G.W., Exc., 1980
12" x 48", Cincinnati, I.D. Attach., Pick Feed, Trav. Feed, 3 HP, V.S. Headstock, Nice Tail, 1965
14" x 24", Landis, No. 2R, Plunge, Hyd. Table, Trav. Feeds, 20" G.W., Exc., 1980
14" x 36", Cincinnati, I.D. Attach., Rapid Infeed, Pick Feed, V.S. Headstock, Exc., 1965
14" x 36", Landis, No. 3R, Swing Down I.D., Pick Feed, 14" G.W., Exc., 1977
14" x 36", Warner & Swasey, No. LU4, 14" G.W., Live/Dead Spdl., 5 HP, Exc., 1978
14" x 48", Cincinnati, Univ., I.D. Att., Auto. Feed, Live/Dead Head, V.S. Head, Exc., 1968
14 x 48 Landis, 3RH, ID Ztt., Plunge, 16"gw, Hyd Table, Exc, 1970
14" x 72", Cincinnati, Plunge, Hyd. Table, I.D. Att., Tooling, Nice Tool, 1970
18" x 48", Cincinnati, Univ., Rapid Feed, Tarry, 16" G.W., 1968-1971 (2)
18" x 48", Landis, No. 3RH, Hyd, 16" G.W., Plunge, 1974
18" x 48", Landis, No. 3RH, Rapid Feed, Traverse Feed, V.S. Headstock, 14" GW, 1982
18" x 48", Warner & Swasey, No. U4, Head & Tailstock, Hyd. Table, 16" G.W., Very Clean, 1976
18" x 96", Landis, No. 3RH, Microtronic Feed, Swing Down I.D., Loaded w/Options, Gov't Reserve, 1980
24" x 72", Landis, No. 3RH, Microtronic Feed, Swing Down I.D., Loaded w/Options, Gov't, 1980
Brown & Sharpe, No. 814U, Valuemaster, Dresser, L & R Spindle, Extra Tooling, Excellent, 1973
Parker-Majestic, No. 1, Univ. Swing Around Head, I.D./O.D., Power Feed, Misc. Tooling, 1968, Exc.

0G4925 GRINDERS, DISC, HORIZONTAL, DOUBLE END OPPOSED
No. 125 Gardner, Thru Feed, from Running Svc., Inspect under Power
No. 226, Besly, 30", Rotary Carrier, 30" Wheel, 25 HP each Head, 1956;_2
No. 2440-42, Gardner, 60HP, Gun Feed, Face Cut, From Service, 1971
No. 253, Besly, Belt Thru-Feed, 42" Wheels, From Service, Very Nice
No. 2H20-23, Gardner, Rotary Feed, 20 HP, 23" Wheels, From Bearing Mfg. (2)
No. 2H30-30, Gardner, Rotary Carrier, 30 HP Motors, Pushbutton Station, Electrics, Exc., 1968 (2)
No. 2H40-42, Gardner, Shuttle Feed, 60 HP Motors, Dresser, From SRV, 1973
No. DH6-30, Besly, Thru Rotary Feed, 30" G.W., Dresser, Incr. Feeds, Several, Up To 1985
No. DH6-30, Besly, rotary feed, dressler, 30" old wheel, 30 HP, exc
No. SDG2-23, Gardner, Rotary Feed, Incremental Feed, Aerospace, Very Low Hours, Exc., 1977
No. SDG3-30, Gardner, 30" Sw, 30 HP Motors, Swg Arm Fixture, Exc, 1978
No. SDG5-30, Gardner, Belt T.F., 40 HP Motors, Incr. Feeds, Lube, 1970
No. SDG6-30, Gardner, 60 HP Motors, Belt Type T.F., Incr. Feeds, Exc., 1975
No. SDG6-42, Gardner, Con-Rod Carrier, 50 HP, Incr. Feed, From Service, 1983 (2)

0G4931 GRINDERS, DISC, HORIZONTAL, SINGLE END
No. SDG3-1-30, Gardner, 30" G.W., 20 HP, Inc. Feed, Dresser, Lube System, 1981

0G4975 GRINDERS, DISC, VERTICAL, DOUBLE END OPPOSED
No. 2V18, Gardner, 18" G.W., 10 HP, Motors, 28" Carrier, Incr. Feeds, Remfd. 2001

0G4990 GRINDERS, DISC, VERTICAL, SINGLE END
No. GVS-1-23, Manual & Auto Cycle, P.L.C., Face Cut, Very Nice

0G6204 GRINDERS, FACE
No. 18, Abrasive Rotary Face, 21" x 14" Chuck, 18" Segmented Wheel, 15 HP

0G6606 GRINDERS, INTERNAL
No. 0CF70 Cincinnati Heald, 50,000 RPM Spdl., 2-3/8" Dia. of Work, P.T.I. Control, 1970-1972, Ref. JH,_3
No. 0CF80, Heald, Roll Head, 2" Cap., Auto. Load/Unload, Excellent, 1974
No. 1, 10x24, Parker, Power Feed, Swivel Head, Exc, 1981
No. 10X24, Parker-Masjectic, Power Table, Flip-Up Dresser, Electrical, Nice Tool, 1963
No. 1109 Bryant, Semi-Automatic, Hi-Freq. & Belted Spdl., Gov't Surplus (3)
No. 1116 Bryant, Manual Cross Slide, 30,000 RPM Spdl., Excellent, Gov't Surplus (2)
No. 1126, Bryant, 26" Swing, Like New, Gov't Storage
No. 1130, Bryant, 30" Sw., 12" Stroke, Dresser, Spdl. 1955
No. 1209 Bryant, 9" Swing, Dresser, Hi-Frequency Spindle w/Generator, Excellent, Gov't Surplus, 1951
No. 1309 Bryant, Dual Spindle, Very Nice, Ref. JH,_2
No. 1316R, Bryant,, 2-Spindles, Truing, Auto Feed, Exc. Tool. 1950's [0041239]
No. 1416 Bryant, Long Base, 24" Sw., 16" Str., Extras, 1952, Gov't Storage
No. 16RS16, Bryant, 16" Sw., 13" Stroke, Dresser, 3" Thru Hole, 12" Face Plate, Spdl., From Gov't, Exc.
No. 171, Cincinnati-Heald, Sizematic, Auto. Feed, Auto. Truing, Spdl Chuck, Like New, 1980 (2)
No. 171, Heald, Bore & Face, Barrel Slide Facing, Dressers, Exc., Recond. 2000
No. 1CF70 Cincinnati Heald, 6-Jaw Chuck, Auto. Load, Spdl., Dresser, 1960's-1970's, Ref. JH (4)
No. 1CF80, Cincinnati Heald, Roll Work Head, Dresser, 4-1/2" Capacity, Auto. Load/Unload, To 1974 (2)
No. 1CF90, Heald, Bore, Auto. Load, Auto. Cycle, Excellent, 1972
No. 1CF91 Heald Bearing Race Grinder, Spdl,Radius Dresser,Auto.Load,Exc.,Running,'60 & '70's,Ref.JH,_3
No. 1EF70UJ, Heald, Auto. Load, Auto. Cycle, Red Head Spindle, Set Up For Univ. Joints, 1980
No. 2209D Bryant, Hi-Freq. & Belted Spdl., Auto. Loaders, Ref. JH (3)
No. 271, Heald Toolroom,Manual & Power Tbl.,Cross Sliding Work Hd.,12" Str.,from Gov't Storage, 1954 (2)
No. 271, Heald, Sizematic, 3 Remanufactured, In Stock, Updated Controls, 1 Yr. Warranty
No. 272, Heald, Toolroom, X-Slide, Spindle, Dresser, Hyd., Very Nice, 1962
No. 272, Heald, Sizematic, Auto. Cycle, Hyd. Cross Sliding Work Head, Excellent, 1960's
No. 273A, Cincinnati-Heald, 12" Ext. Base, Auto. Feed, Plunge, Spindle, Sine Bar, Exc., 1976 (2)
No. 273A, Heald,, Universal w/ 12" ext. base, Sine Bar, V. S. Head, Auto Feed, Excellent Condition!! 1980
No. 275, Heald,48" ext bridge, facing stop, auto cycle, dresser, nice, 1980
No. 276, Heald, 48" Bridge, Dresser, Spindle, Auto. Feed, Exc., 1986
No. 281, Heald, Roll Type Work Head, Auto. Feed, Auto. Dress, Auto. Load, Unload, Exc., Gov't Reserve
No. 2EF73, Cincinnati Heald, Hydrostatic Slides, Sine Bar, 20" Sw., 16" Stroke, Excellent, 1974-1981;_3
No. 3216J Bryant, Jump Slide, 4-Jaw Chuck, 16" Swing, 1966, Ref. JH,_2
No. 72A5, Heald, 96" Ext. Bridge, Fully Tooled, Clean_2
No. 74, Heald, 92" Ext. Base, Tooling, Long Stroke, Exc.
No. 9x12, Model A, Parker Magestic, Power Table, Digital Readout for Infeed, V.S. Workhead, 1960
No. B, Bryant, Miniature, Loading, Dresser, Spindle, Nice
No. C Bryant Centalign, 60,000 Hi-Freq.Spdl,Shoe Type,Auto.Load,from Running Service,1960's,Ref.JH (5)
No. LL1, Bryant, Internal, Lectraline, Card Reader, CNC, Loader, 1985-1990 (2)

0G6635 GRINDERS, INTERNAL, N/C & CNC
Bryans, No. LL3, 2-Axis, Dresser, Spindle, Exc, 1989
Bryant, No. LL3, Lectraline, Spindle, Dresser, From Aircraft, 1981
Cincinnati Cinternal, No. 2, CNC, 3-Axis, 24" Swing, 17" Str., Chuck, Like New, 1991

0G7207 GRINDERS, PROFILE
No. 2, Boyar-Schultz, Heavy Duty, 6" Dia. G.W., Excellent (2)

0G8025 GRINDERS, SURFACE, RECIPROC. TABLE (HOR. SPDL.)
6" x 18", DoAll, No. 618, V.S., 1 HP Spdl., Power Feeds, 1980
8" x 18", Gallmeyer & Livingston, No. 260, Chuck, Auto. C.F., Hyd. Table, 10" G.W., Exc., Tool, 1968
10" x 18", Norton, No. 10X18, 3 HP, 15" Vertical, Incr. C.F., Hyd. Table, Very Nice, 1970
10" x 24", Thompson, Hyd. Table, Auto. C.F., Power Vertical, Rebuilt 2000
12" x 36", Brown & Sharpe, 5 HP, 12" x 36" Mag. Chuck, 12" G.W., 19" Vertical, Nice, 1971
12" x 72", Thompson, 5 HP, 12 x 72 Mag Chuck, Hyd Table, Auto CF, 12" GW, 1952
14" x 48", Mattison, 15 HP, Travatrol, Incr. D.F., 20" x 3" G.W.
14" x 72", Mattison, 20" x 3" G.W., Incr. D.F., 25 HP, Exc. Tool, 1966
18" x 48", Gallmeyer & Livingston, No. A, 20" G.W., 25 HP Spindle, Auto. C.F./Table, 1965
24" x 36" x 96", Mattison, 30 HP Spindle, Incr. D.F., Auto. C.F., Rescraped Slides, 1980

0G8080 GRINDERS, SURFACE, ROTARY TYPE (HORIZ. SPDL.)
6", Cincinnati Heald, No. 161, Mag. Chuck, 10" Swing, Auto. Feed, Hyd. Table, Very Nice, 1970 (2)
13", Heald, No. 261, Auto. Feed, Hyd. Tlstk., Exc., Gov't Reserve
16", Cincinnati Heald, No. 261, Auto. Feed, Hyd. Table, Exc. Tool, 1978
24", Cincinnati Heald, No. 361, Auto. Feed, Exc. Machine, 1980, Inspect Running, (2), Exc
30", Cin-Heald, No. 361, Auto Feed, Like New, 1991
30" Chk, Sundstrand Arter, No. E16, 19" Swing, 15 HP, 16" Wheel, 12" Vertical Range, 1969

0G8100 GRINDERS, SURFACE, ROTARY TYPE (VERT. SPDL.)
16", Blanchard, No. 11-16, 15 HP, 16" Mag. Chuck, Dresser, Chuck Controls, Exc., Gov't Reserve, Several
20", Blanchard, No. 11-20, 15 HP, Power Down, 12" Under Wheel, Exc. (7)
36", Blanchard, No. 20-36, 40 HP, 12" Vert., Exc. Chuck Life, From Service, 1968
36", Blanchard, 25/40 HP, Dresser, 90% Chuck Life 36", 18" G.W., (3) Rebuilt
42", Blanchard, No. 22D-42, 50 HP, 24" Vertical, Auto. Lube, 1978, Exc. (2)
42", Blanchard, No. 22D42, 50 HP, 18" Vert., Dresser, Remfd. 2001
42", Blanchard, No. 22K-42, 100 HP Geared Head, 21" Vertical, Conveyor in Base, Auto Lube, Exc, 1973
48", Blanchard, No. 42-84,250 HP, 84" magchuck, geared head, 45" vert
Blanchard, No. 16A2, 48" Do-Nut Mag.Chk.,30 HP,Sludge Remover,from Runn'g Production,Excellent
Blanchard, No. 18A2, Fixture Table, 30 HP Heads, Running Condition

0G8500 GRINDERS, TOOL & CUTTER
No. 13, Brown & Sharpe, Mech. Table, Motorized Head, Tailstock, Swing, 5 In Stock, Gov't
No. 2, Cincinnati, Universal, Centers, Tooling, Excellent, 1978
Cincinnati Monoset, Several, Good Running, Up To 1978

0G8925 GRINDERS, VERTICAL UNIVERSAL
Bryant, No. C, Vertical Cam Grinder, Recently Rebuilt_8
Springfield, No. 1TR, Swing 21", 18" Face Plate, 14" Stroke, Spindle, Tarry, Face Feed, Gov't Storage, 1953

0L0762 LAPPING MACHINES, CENTER TYPE
No. 74 Ex-Cell-O, 10"x36", wheel dresser