AGE: 1999/2000

SPECIFICATIONS:

Coil Weight: 50,000 Lbs.
Coil I.D.: 20" to 24" Entry, 20" (Pads for 24") Exit

Direction: Right-to-Left

CONSISTING OF:

Entry Coil Car:

54" Wide Bed
Self-Contained Hydraulics
8" Bore Hydraulic Lift Cylinder
Hydraulic Lift
Hydraulic Motor Travel
Hand Pendant Control
Cable Reel
14" From Floor to Bottom of "V" Cradle
Overall Dimensions: 83" L x 54" W x 58" High

Mandrel Uncoiler:

19" to 25" Hydraulic Expansion
24.5" to 30.5" (Bolt-On Pads) Expansion
52" Face Mandrel
Slide Base
Powered Overarm Holddown Roll
AC Motor Threading Drive with Air Clutch
Water Cooled Brake
52" Passline From Floor to Center of Mandrel
Overall Dimensions: 144" L x 84" W x 99" High

Peeler / Coil Breaker Unit:

Peeler Table with 36" Wide Blade

3-Roll Coil Breaker:

7" Dia. x 58" Face Rolls, 1 Over 2
Top Roll Adjusted by Hydraulic Motor Driven
Jackscrews
Bottom Rolls Driven by Hydraulic Motor

59" Passline Height
Overall Dimensions: 103" L x 102" W x 97" High

Pinch Rolls / Crop Shear:

6" Dia x 55" Face Pinch Rolls:

Non-Driven
Hydraulic Cylinder Loaded

50" x 0.375" Roller Type Crop Shear:

Hydraulic Cylinder Actuated

Overall Dimensions: 160" L x 27" W x 81" High

Removable Head Slitter, 2 Heads:

Entry Threading Table
6" Dia. x 55.5" Face Entry Driven Pinch Rolls
Entry Roller Side Guides with
Hydraulic Motor Adjustment
7.5" Dia. x 52" Face Arbors
Over the Arbor Design
Outboard will Travel in to 38" for Heavier Gauges
30 HP, 1750 RPM, Foote Jones Helical Gearmotor,
with 57.7:1 Ratio
30 HP, 1760 RPM, Pacemaker Motor, 230/460 Volt,
Inline with Foot Jones Motor
50" Passline Height
Overall Dimensions: 188" L x 84" W x 63" High
88" High with Head

Recoiler:

Rebuilt in 2000
Hydraulic Push-Off
20" Dia. x 54" Face Drum
Bolt-On Pads for 24" Dia.
Hydraulic Grip - Expand
2-Speed Reducer
125 HP DC Motor, 650 / 1950 RPM, 500 Volt,
with Blower ABB DCS 800 Driver
Overarm Separator
72" O.D. Capacity
54" Passline From Floor to Center of Drum
Overall Dimensions: 178" L x 129" W x 94" High

2-Arm Turnstile:

C-Hook Type Arms with 6" Wide x 8" High Slot
57" Approx. Useable Arm Length
Powered Rotation
Hydraulic Push-Off
Overall Dimensions: 190" L x 97" W x 73" High

(2) Scrap Winders:

Dual Opposed Cones
36" W x 38" Dia. Ball
Hydraulic Level Wind
Hydraulic Motor Powered
Overall Dimensions: 93" L x 54" W x 66" High

Bass Machinery
2100 Hendon St Toledo OH 43606-4543
Tel: 419-243-2277 Fax: 330-299-0520
Email (Request Quote): sales@bassmachinery.com
Web: www.bassmachinery.com