You can see a video of this machine at
           https://youtu.be/WgdZBV0DlK8
           
           All Specifications are from OEM Brochure, Buyer should confirm all details:
           
           
           Equipped With:
           Fagor CNC Control
           Hand Control
           3-jaw chuck
           12 position turret mounted on Cross Slide
           Tailstock
           
           Specifications:
             Swing over bed:                    20" / 500mm
             Swing over cross slide:            11.5" / 292mm
             Swing over gap:                    28" / 710mm
             Length of gap:                     12" / 300mm
             Hole thru spindle:                 3.312" / 85mm
             Spindle nose:                      D1-8
             Cross slide travel:                15"/ 380mm
             Longitudinal travel:               51.125"/1300mm
             Center Distance:                   60"
             Bed width:                         13" / 330mm .
             Spindle speeds (ranges):           30-2000RPM (3)
             Spindle speeds within the ranges   30-130/130-440/440-2000
             Feed rate z-axis                   0-400 IPM / 0-10000mm/min
             Feed rate x-axis                   0-250 IPM / 0-6350mm
             Ballscrew diameter z-axis          1.5"/ 38mm
             Ballscrew diameter x-axis          1" / 25mm 
             Z axis servo                       1.4 HP/1 KW 
             X axis servo                       1.4 HP/1 KW 
             Tailstock quill dia.               3" / 76mm 
             Tailstock quill travel             6.25" / 160mm 
             Tailstock taper                    MT #5 
             Spindle motor                      15 HP / 11 KW 
           
           Machine:  114" x 68" x 81" 6,600 lbs
           
           
           

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com