STANDARD SPECIFICATIONS

RANGE:

108" DIAMETER X 24" HIGH OVER 96" CHUCK WITH NEW SEGMENTS.

iNPOSITION 48" SEGMENT CHUCK CLEARS 96" MAGNETIC CHUCK BY 2 ".

elXTENDED SWING AND VERTICAL RANGE AVAILABLE



WORK TABLE

BLANCHARD ONE-PIECE STEEL 96" DIAMETER MAGNETIC CHUCK WITH 1

1/16" POLE SPACING AND 4i" CENTER HOLE. cHUCK USES DIRECT

CURRENT ONLY. 3,845 WATTS REQUIRED - SUPPLIED BY nTEUTROFIER

WHEN ORDERED. 230 VOLTS dc RECOMMENDED. MAXIMUM WEIGHT OF OFF

CENTER WORK LOAD ON CHUCK - 22,000 POUNDS.

WHEEL:

48" c4ORTLAND TYPE BONUS GRIND SEGMENT CHUCK. cHUCK USES 8"

LONG SEGMENT CHUCK CLEARS 96" MAGNETIC CHUCK BY 2".

eXTENDED SWING AND VERTICAL RANGE AVAILABLE.

kva rEQUIREMENTS:
150 hp.

WORK TABLE:
BLANCHARD ONE-PIECE STEEL 96" DIAMETER MAGNETIC CHUCK WITH 1

1/16" POLE SPACING AND 4" CENTER HOLE. cHUCK USES DIRECT CURRENT

ONLY. 3,845 WATTS REQUIRED - SUPPLIED BY nEUTROFIER WHEN

ORDERED. 230 VOLTS dc RECOMMENDED. mAXIMUM WEIGHT OF OFF CENTER

WORK LOAD ON CHUCK - 22,000 POUNDS.

WHEEL:
48" cORTLAND TYPE BONUS GRIND SEGMENT CHUCK. cHUCK USES 8" LONG

BONUS GRIND SEGMENTS, 11 PER SET.






WHEEL: 297 rpm - 60 hz; 248 rpm - 50 hz.
cHUCK: 2.6, 4.1, 6.7, 10.2 rpm H_z; 2.2, 3.4, 5.6, 8.5 - 50 hz .
^c0HUCK MOTOR: 1200 rhz; 2.2, 3.4, 5.6, 8.5 - 50 hz.
cHUCK MOTOR: 1200 rpm - 60 hz; 1000rpm - 50 hz.
tABLE TRAVERSE MOTOR: R!pm - 60 h@z0; 1000 r0p m - 50 hz.
pm - 60 hz; 1000 rpm - 50 hz.
hEAD TRAVERSE MOTOR: 900 rpm - 60 hz; 750 rpm - 50 hz.
fEED MOTOR: 1800 rpm H_z; 1500 rp m6 - 50 h0z.

FEED;
z; 1500 rpm - 50 hz.

FEED:
vERTICAL DOWN FEED BY HAND OR POWER. POWER FEED VARIABLE FROM.008" (.2MM) TO

.096" (2.44MM) E WITH ACCURATE AUTOMATIC STOP. MAXIMUM DOWN FEED BEFORE STOP

OPERATES IS .600" (P15.24MM). wHEEL HEAD HAS RAPID RAISE AND LOWER BY POWER

INTERLOCKED WITH FEED.

COOLANT SUPPLY:
MODEL 48dU-96 REQUIRES A LARGE CAPACITY SEPARATE COOLANT SYSTEM WITH TWO

PUMPS IF OUTSIDE TANK IS USED, OR TWO SOLENOID CONTROL VALVES, IF CONNECTED TO

CENTRAL COOLANT SYSTEM.
TE WITH ACCURATE AUTOMATIC STOP. MAXIMUM DOWN FEED BEFORE STOP OPERATES IS

.600" (15.24MM). wHEEL HEAD HAS RAPID RAISE AND LOWER BY POWER INTERLOCKED

WITH FEED.

COOLANT SUPPLY:
mODEL 48d-96 REQUIRES A LARGE CAPACITY SEPARATE COOLANT SYSTEM WITH TWO PUMPS

IF OUTSIDE TANK IS USED, OR TWO SOLENOID CONTROL VALVES, IF CONNECTED TO

CENTRAL COOLANT SYSTEM.

Presses For Industry Inc
20501 Hoover Rd Detroit MI 48205-1075
Tel: 313-839-9300 Fax: 313-839-9600
Web: www.pressesforindustry.com