Dynamic 2960G. . . $ 45,000.00 Dynamic 29120G $ 51,700.00
Dynamic 2980G. . . $ 47,450.00 Dynamic 29160 $ 57,550.00

OPTIONAL ACCESSORIES:
24" 4 jaw independent chuck, D1-11, with direct mount . . . . . . . 5,750.00
24" face plate. . . . . . . . . . . . . . . . . . . . . . . . . . . 1,500.00
Micrometer carriage stop. . . . . . . . . . . . . . . . . . . . . . 450.00
Six (6) position carriage stop. . . . . . . . . . . . . . . . . . . 525.00
Taper turning attachment (installed). . . . . . . . . . . . . . . . 3,100.00
DORIAN quick change tool post with 6 tool holders (DA). . . . . . . 2,750.00
NEWALL NMS800 "LATHEPAC" digital readout system--installed. . . 60" 4,250.00
Newall NMS800 "LATHEPAC" digital readout system--installed. . . 80" 5,200.00
Newall NMS800 "LATHEPAC" digital readout system--installed. . .120" 6,200.00
Newall NMS800 "LATHEPAC" digital readout system--installed. . .160" 7,550.00
Inbound freight to Miami, FL. . . . . . . . . . . . . . . .starting 3,000.00

FLOOR DIMENSION: 11O" x 50", 129" x 50", 169" x 50", 209" x 50"
NET WEIGHT: (7,650LBS) (7,680LBS) (9,190LBS) (10,070LBS)

STANDARD ACCESSORIES:
Removable gap, Steady rest with roller jaws, 20" 4 jaw chuck (D1-11),
Coolant system, Halogen light, Full length splash guard, 12" adapter plate,
Assorted tools, Operation and service manual, Four way toolpost,
Automatic longitudinal multiple feed stop, 16" drive plate,
Rapid crossfeed & carriage traverse, 20" face plate, Follow rest

MACHINE FEATURES:
15 HP single speed motor, Ampere meter, Hardened and ground bedways
Inch and metric threading (no gear change required), Dual inch/metric
dials on cross slide & compound (inch dial only on longitudinal handwheel)
Removable chip pan, Headstock with magnetic clutch & electric brake
Chuck guard with emergency stop, 4-1/8" spindle bore

SPECIFICATIONS:
Swing over bed 29-1/8"
Swing over cross slide 20-1/2"
Swing in gap 37-25/32"
Spindle hole 4-1/8"
Spindle nose D1-11 camlock
Spindle speeds--number 12
--range 25 to 1200 rpm
Inch threads--number 45
--range 2 to 56 tpi
Metric threads--number 31
--range 0.5 to to 14 mm
Feeds--number
--range (longitgitudinal) .0012" to .0287"
--range (cross) .0004" to .0118"
Bed width 16-1/2"
Tailstock taper #5 MT
Spindle travel 7"
Spindle diameter 3-1/32"
Main motor power 15 HP
Electrics 220/440/3/60 HZ

A M Metalmaq Inc
320 E 10th Ct Hialeah FL 33010-5151
Tel: 305-883-9200 Fax: 305-883-0660
Email (Request Quote): sales@ammetalmaq.com
Web: www.ammetalmaq.com