METALMAQ model B170VS Bed Mill with standard accessories. . . . . . $

OPTIONAL ACCESSORIES:
ALIGN SP250A power feed unit--longitudinal (X) axis . . . . . . . .
ALIGN SP250B power feed unit--cross (Y) axis. . . . . . . . . . . .
ALIGN SP250C power feed unit--vertical (Z) axis . . . . . . . . . .
Gear type power feed unit--longitudinal (X) axis. . . . . . . . . .
Gear type power feed unit--cross (Y) axis . . . . . . . . . . . . .
Coolant system (1/8 HP, 220/3/60) . . . . . . . . . . . . . . . . .
Coolant base tray . . . . . . . . . . . . . . . . . . . . . . . . .
Quartz worklight. . . . . . . . . . . . . . . . . . . . . . . . . .
Ball screw on vertical (Z) axis . . . . . . . . . . . . . . . . . .
EVS head by inverter system (3 HP). . . . . . . . . . . . . . . . .
Air power drawbar . . . . . . . . . . . . . . . . . . . . . . . . .
NEWALL Topaz 2 axis digital readout (installed) . . . . . . . . . .
NEWALL Topaz 3 axis digital readout (installed) . . . . . . . . . .
HOMGE 6" angle-lock milling vise. . . . . . . . . . . . . . . . . .
Swivel base for 6" vise . . . . . . . . . . . . . . . . . . . . . .

ELECTRICS: 220/440 volt, 3 phase, 60 Hz.
F.O.B.: Hialeah, FL

STANDARD ACCESSORIES:
3 HP variable speed head with R-8 spindle (#30 taper optional)
Hardened and ground 10" x 54" table with ground T-slots
Hardened and ground longitudinal (X), cross (Y) and vertical (Z) axes ways
Ball screws on longitudinal (X) and cross (Y) axes with double nut
Power lifting motor for table/knee vertical (Z) travel
Box ways on both cross (Y) and vertical (Z) axes
Turcite-B coated XYZ ways, gibs and saddle slideways
Counter-weight on head
Licensed Meehanite casting
Electric box and control panel

SPECIFICATIONS:
Size of table (length x width)
--standard 10" x 54" (250mm x 1350mm)
Hardened & ground ways yes
Longitudinal travel
--without power feed unit 30" (770mm)
--with power feed unit 27" (690mm)
Cross travel 21" (540mm)
Vertical head travel--manual 20.8" (530mm)
--automatic 20" (500mm)
Quill traverse 5" (127mm)
Quill power feed rate--number 3
--range .0015"--.003"--.006"
(0.04mm--0.08mm--0.14mm)
Spindle taper R-8 (#30 optional)
Main motor 3 HP
Head swivels right & left 45 degrees
Rapid traverse rate of head (Z)
lifting motor 35.4ipm (900mm/min)
Distance from center of spindle
to the column 18-1/4" (465mm)
Distance from spindle nose to table top
--manual (min-max) 2.1" to 23" (55mm-585mm)
--automatic (min-max) 2.9" to 22.6" (75mm-575mm)
Spindle speeds--number infinitely variable
--range 60 to 4500 rpm
Net weight (approx.) 4,350 lbs. (1940 kgs)

A M Metalmaq Inc
320 E 10th Ct Hialeah FL 33010-5151
Tel: 305-883-9200 Fax: 305-883-0660
Email (Request Quote): sales@ammetalmaq.com
Web: www.ammetalmaq.com