One new METALMAQ model B350VS-SP Bed Mill with standard
accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . $

OPTIONAL ACCESSORIES:
Ball screw on vertical (Z) axis . . . . . . . . . . . . . . . . . .
EVS head by inverter system (5 HP). . . . . . . . . . . . . . . . .
Air power drawbar . . . . . . . . . . . . . . . . . . . . . . . . .
11" x 58" table providing 47" longitudinal travel . . . . . . . . .
Extra high column (5.9" higher than standard column). . . . . . . .
NEWALL 2 axis digital readout (installed) . . . . . . . . . .
NEWALL 3 axis digital readout (installed) . . . . . . . . . .
KURT 6" angle-lock milling vise . . . . . . . . . . . . . . . . . .
Swivel base for 6" vise . . . . . . . . . . . . . . . . . . . . . .

ELECTRICS: 220/440 volt, 3 phase, 60 Hz.
F.O.B.: Hialeah, FL

STANDARD ACCESSORIES:
5 HP variable speed head with #40 spindle taper
Hardened and ground 15" x 50" table with ground T-slots
Hardened and ground longitudinal (X), cross (Y) and vertical (Z) axes ways
Ball screws on longitudinal (X) and cross (Y) axes
Automatic longitudinal (X), cross (Y) and vertical (Z) feed
and rapid travese via AC servo motors
Box ways on both cross (Y) and vertical (Z) axes
Turcite-B coated XYZ ways, gibs and saddle slideways
Counter-weight on head
Licensed Meehanite casting
Electric box and control panel
Coolant system with base tray and column splash guard
Automatic lubrication
Quartz worklight

SPECIFICATIONS:
Size of table (length x width)
--standard 15" x 50" (380mm x 1270mm)
--optional 15" x 58" (380mm x 1470)
Longitudinal travel--standard table 39.3" (1000mm)
--optional table 47" (1200mm)
Cross travel 20" (500mm)
Vertical head travel
--standard column 19" (480mm)
--extended height column 24.8" (630mm)
Quill traverse 5" (127mm)
Quill power feed rate--number 3
--range .0015"--.003"--.006"
(0.04mm--0.08mm--0.14mm)
Spindle taper #40
Main motor 5 HP
Head swivels right & left 45 degrees
Automatic power feed rate XYZ axes 1 to 47ipm (25mm a 1200mm)
Rapid traverse rate XYZ axes 78.7 ipm (2000mm/min)
Distance from center of spindle
to the column 21.6" (550mm)
Distance from spindle nose to table top
--standard (min-max) 5.5"--23.6" (140mm--600mm)
--with optional high column 5.5"--29" (140mm--740mm)
Spindle speeds--number infinitely variable
--range 60 to 4300 rpm
Net weight (approx.) 6,700 lbs. (3000 kgs)

A M Metalmaq Inc
320 E 10th Ct Hialeah FL 33010-5151
Tel: 305-883-9200 Fax: 305-883-0660
Email (Request Quote): sales@ammetalmaq.com
Web: www.ammetalmaq.com