Call or email with the make and model of your machine for a quote.
          
          Turbo HB Conveyors
           - A Conveyor consisting of steel hinge plates joined together by steel pins.
          
          Material is carried along the conveyor much like people on an escalator. Hinge
          
          belt conveyors are recommended for most steel and general purpose
          
          applications.  Hinge belt conveyors are the most durable conveyor for stringy
          
          and bailed up chips.
           - Hinge belt conveyors come in Standard Duty, Heavy Duty and Super Heavy Duty
          
          models. The model selected is based on machine horse power, chip load and, in
          
          some cases, machine tool design.
          
          Type of Belt
           - Perforated - Hinge belt plates containing a hole pattern allowing coolant
          
          to easily drain through the belt. Ideal for most steel applications.
          
          Perforated hinge belt plates are not recommended for fine chips as the chips
          
          wash through the belt with the coolant.
           - Double Perforated - Hinge belt plates containing twice the normal holes.
          
          Used with higher viscosity cutting fluids, such as cutting oil, to allow for
          
          the slower draining time of these fluids.
           - Non Perforated - Hinge belt plates without a hole pattern. Used when fine
          
          chips are present in a machining application to minimize their movement into
          
          the coolant sump. In all fine chip applications, a filtering conveyor is
          
          recommended. Non perforated belts will carry more coolant from the machine
          
          than perforated belts.
           - Any hinge belt conveyor can be equipped with a Perforated, Double
          
          Perforated or Non Perforated belt.
          
          Filtering Conveyors
           - Turbo MF2 - A standard hinge belt conveyor mounted on top of a scraper
          
          Turbo MF conveyor with a rotating, self-cleaning drum filter. The best choice
          
          for heavy chip loads, mixed materials, and a combination of materials. This
          
          conveyor will handle any type of chip including stringers, balled up chips,
          
          and fine chips. Heavy chip loads associated with high speed machining are
          
          handled well along with the fine chips from the same type of machining. The
          
          filtration level is standard at 50 micron nominal. This conveyor solves all
          
          problems associated with chip migration in coolant tanks.
           - Turbo MF3 - A standard hinge belt conveyor mounted on top of a scraper
          
          Turbo MF conveyor with a rotating, self-cleaning drum filter. The Turbo MF3
          
          design will often allow this conveyor to be used in tighter spaces from a
          
          machine and plant layout perspective than a Turbo MF2. This
          conveyor will handle any material and chip type while providing 50 micron
          
          coolant filtration.
           - Turbo MF - A scraper conveyor combined with a patented rotating, self-
          
          cleaning drum filter. This product works well with medium chip loads of
          
          discontinuous broken chips and fine chips. Will work well on most aluminum
          
          applications. Not recommended for steel applications where
          stringy, balled up chips are possible. The filtration level is standard at 250
          
          micron nominal.
           - Turbo MS500 - A scraper conveyor combined with self-cleaning filter media.
          
          This conveyor is good for broken chip material such as aluminum, brass and
          
          cast iron in medium to light chip loads. Scraper conveyors are not recommended
          
          for applications with continuous (stringy, balled up, etc.) chips of any kind.
          
          The filtration level is 500 micron nominal. The H design incorporates the
          
          filter media into the conveyor load resulting in a more economical filtering
          
          conveyor.
           - Turbo MH Series- A hinge belt conveyor incorporating either 250 or 500
          
          micron self-cleaning filters. This economical design is approximately the same
          
          size as a hinge belt conveyor. In most cases, the MH will fit in the machines
          
          standard coolant tank. The design also takes up less floor space.
          
          Scraper Conveyors
           - Scraper conveyors consist of a conveyor body and belt made from chain with
          
          scraper (drag) bars suspended between the chain. The scraper bars scrape chips
          
          along the bottom of the conveyor frame and up an incline. Scraper conveyors
          
          are specified for discontinuous chip applications only. Do not use scraper
          
          conveyors for any application with stringy and/or bailed up chips of any kind.
          
          Turbo Magnetic Conveyors
           - Magnetic conveyors are designed with a fully enclosed moving belt
          
          containing a series of powerful, permanent magnets. The belt is designed to
          
          move the magnets in close proximity to a stainless steel top cover or slider
          
          face. The magnets attract ferrous material and pull the ferrous chips along
          
          the slider face until the materials is discharged from the conveyor. These
          
          conveyors are ideal for cast iron and broken steel chip applications. Because
          
          the magnets are in close proximity to one another, magnetic conveyors do not
          
          handle stringy chips well.
          
          
          Optional Equipment
           - Air Header Assembly - Mounted to the discharge section of the conveyor,
          
          this assembly directs a stream of customer supplied compressed air to the
          
          underside of the conveyor belt as it moves back into the incline of the
          
          conveyor. The air stream blows off any chips adhering to the belt before they
          
          are allowed to migrate back into the conveyor body
           - Chip Stripper Bar - Mounted to the discharge section of the conveyor, the
          
          chip stripper bar is designed to snag long stringy chips to rip the chips off
          
          the conveyor belt before they have a chance to migrate back in the conveyor
          
          body
           - Variable Speed Drive - Three phase electrical control device allows the
          
          belt speed to be varied from 2-9 FPM. This option is ideal for customers with
          
          changing chip loads so the belt speed can be set based on the amount of chips
          
          present at any given time. This option is standard on Magnetic, MH, Microfine
          
          and Microfine 2 Conveyors.
           - Coolant Collector - Mounted to the discharge end of the conveyor, the
          
          coolant collector traps coolant dripping from the discharge and funnels the
          
          coolant back into the
          machine sump
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): tina@automatics.com
Web: www.automatics.com