General Specifications As Per Brochure
           
           Pressure:                                1500 PSI
           
           Coolant Volume:                          Automatically Variable
                                                    3 - 10.5 GPM
           Tank:                                    100 Gallon
           Filtration:                              Dual Parallel Bags
           Outlets:                                 2
           
           
           
           The GV2-80 can operate as two completely independent 40 liter (10.5 gpm)
           modules or combine to give you high pressure AND very high volume (80 liters)
           to one outlet at any time during the same program!
           
           
           
           Standard Configuration:
             The ChipBLASTER GV2-80 is fed by a transfer pump that draws from the machine
           
           tool sump, through the filter vessel to the
           integral 380 liter (100 gal) tank. When the machine tool calls for coolant,
           
           the filter pump(s) draws the coolant from the
           ChipBLASTER tank and pumps through the post (safety) filter to the inlet of
           
           the positive displacement pump. The coolant then
           flows at high pressure through a series of distribution and safety valves and
           
           on to the machine tool.
           
           M Code Requirement:
           1 "M" code controlled signal is required to operate as one high volume outlet.
           2 "M" code controlled signals are required to operate as two independent
           
           modules.
           3 "M" code controlled signals are required to operate as two independent
           
           modules AND one high volume outlet.
           **24 VDC,110 VAC or 240 VAC latching signal is acceptable .
           
           Required Electrical Power:
           64 amps, 230 VAC, 3 Phase, 60 Hz
           32 amps, 460 VAC, 3 Phase, 60 Hz
           49 amps, 400 VAC, 3 Phase, 50 Hz
           
           Ideal for Machine Tools Up to 50 HP, Dual Turret Lathes & 50 Taper Mills
           
           See brochures for more details and options.
           
           
           

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com