General Specifications As Per Brochure
           
           Max. Pressure:                           100 Bar
           
                                                    1500 PSI
           
           Coolant Volume:                          Automatically Variable
                                                    24 - 120 Liters / Minute
                                                    9 - 31.5 GPM
           Tank:                                    480 Liter / 126 Gallon
           Filtration:                              Dual Parallel Bags
           Outlets:                                 3
           
           
           
           The GV3-120 can operate as three completely independent 40 liter (10.5gpm)
           modules or combine to give you high pressure AND very high volume (120 liters)
           to one outlet at any time during the same program!
           
           
           Standard Configuration:
           
           The ChipBLASTER GV3-120 is fed by a transfer pump that draws from the machine
           
           tool sump, through the filter vessel to the integral 480 liter (126 gal) tank. 
           
           When the machine tool calls for coolant, the filter pump(s) draws the coolant
           
           from the ChipBLASTER tank and pumps through the post (safety) filter to the
           
           inlet of the positive displacement pump. The coolant then flows at high
           
           pressure through a series of distribution and safety valves and on to the
           
           machine tool.
           
           M Code Requirement:
             1 "M" Code Controlled Signal is Required to Operate as One High Volume
           
             Outlet.
             3 "M" Code Controlled Signals are Required to Operate as Three Independent
           
             Modules
           
             4 "M" Code Controlled Signals are Required to Operate as Three Independent
           
             Modules AND One High Volume Outlet
           * If your machine uses pulsed M Codes, please contact ChipBLASTER.
           
           
           Required Electrical Power:
             82 amps, 230 VAC, 3 Phase, 60 Hz
             41 amps, 460 VAC, 3 Phase, 60 Hz
             49 amps, 400 VAC, 3 Phase, 50 Hz
           
           Ideal for Machine Tools Up to 60 Kw (80 HP), Dual Turret Lathes & 50 Taper
           
           Mills.
           
           See brochure for more information and options.
           
           
           
           

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com