General Specifications As Per Brochure
           
           Max. Pressure:                           80 Bar
                                                    1200 PSI
           Coolant Volume:                          Fixed Rate System
                                                    60 Liters / Minute
                                                    16 GPM
           Tank:                                    380 Liter / 100 Gallon
           Filtration:                              Dual Parallel Bags
           Outlets:                                 2
           
           The J2-60 operates as two completely independent 30 liter (8 gpm) modules for
           
           dual turrets or as a single 60 liter (16 gpm) fixed volume unit.
           
           
           Standard Configuration:
           The ChipBLASTER J2-60 is fed by a transfer pump that draws from the machine
           
           tool sump, through the filter vessel to the integral380 liter (100 gal) tank.
           
           When the machine tool calls for coolant, the filter pump(s) draws the coolant
           
           from the ChipBLASTER tank and pumps through the post (safety) filter to the
           
           inlet of the positive displacement pump. The coolant then flows at high
           
           pressure through a series of distribution and safety valves and on to the
           
           machine tool.
           
             1 "M" Code Controlled Signal is Required to Operate as One High Volume
           
             Outlet
             2" M" Code Controlled Signals are Required to Operate as Two Independant
           
             Modules
           24 VDC, 110 VAC or 240 VAC Signal is Acceptable
           *If your machine uses pulsed "M" codes, please contact ChipBLASTER
           
           Required Electrical Power:
             56 amps, 230 VAC, 3 Phase, 60 Hz
             28 amps, 460 VAC, 3 Phase, 60 Hz
             35 amps, 400 VAC, 3 Phase, 50 Hz
           
           Ideal for Machine Tools Up to 30 Kw (40 HP), Dual Turret Lathes & 50 Taper
           
           Mills.
           
           See brochure for more details and options.
           
           
           

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com