This unit will be serviced and guaranteed to be in good working condition by
          
          Crest authorized service technicians
          
           -Power: 480V, 87.0 Amp, 3 Phase, 50/60 HZ
           -Allen Bradley Model SLC-502 Programmable Logic Control w/ an Allen-Bradley
          
           -Panelview 550 Display
           -6-Station
          
          Station #1 - Ultrasonic Immersion Wash
          
          -Immersion Wash w/ overflow weir plumbed to the recirculation/filtration
          
          loop.
          -High-intensity ultrasonics w/ 2000 watts of power. 
          
          -Pump and filter canister w/ 10 micron bag filter & 7-10 GPM recirculation
          
          rate.
          
          -Inline heat exchanger to dissipate heat from the recirculation / filtration
          
          loop.
          
          -Thermostatically-controlled strip heaters sized for a total of 4000 watts
          
          output.
          
          Station #2 - Ultrasonic Emulsion Rinse
          
          -Emulsion Rinse w/ overflow weir plumbed to the recirculation / filtration
          
          loop. 
          -Ultrasonics w/ 2000 watts of power. Pump & filter canister w/ 10 micron
          
          bag filter and 7 - 10 GPM recirculation rate. 
          -Decanting system to recycle decanted solvent.
          
          -Thermostatically controlled strip heaters sized for a total of 4000 watts
          
          output.
          
          
          Station #3 - Ultrasonic Spray-Over-Overflow Immersion Rinse #1
          
          -Immersion Rinse w/ overflow weir plumped to drain. 
          -Incoming water cascades from station #4.
          
          -Ultrasonics w/ 1500 watts of power. 
          -Thermostatically controlled strip heaters sized for a total of 6000 watts
          
          output.
          
          -Parallel-opposed, side-mounted spray rinse headers located above the
          
          immersion sump to spray rinse parts after immerson rinsing.
          
          
          Station #4 - Spray-Over-Overflow Immersion Rinse #2
          
          -Immersion rinse w/ overflow cascade to Station #3.
          -Thermostatically controlled strip heaters sized for a total of 6000 watts
          
          output.
          
          -Parallel opposed, side mounted spray rinse headers located above the
          
          immersion sump to spray rinse parts after immersion rinsing.
          
          
          Station #5 - Recirculating Hot Air Dryer
          
          -Recirculating hot air chamber w/ side plenum & down draft. 
          -Thermostatically controlled air heaters sized for a total of 12500 watts
          
          output.
          
          -One (1) set of parallel-opposed air headers located near the top of the tank
          
          to blow-off parts before entry in the recirculation portion of the dryer.
          
          
          Station #6 - Recirculating Hot Air Dryer
          
          -Recirculating hot air chamber w/ side plenum & down draft. 
          -Thermostatically controlled air heaters sized for a total of 12500 watts
          
          output.
          
          -One (1) set of parallel-opposed air headers located near the top of the tank
          
          to blow-off parts before entry in the recirculation portion of the dryer.
          
             
          Dimensions:   
             2 - 26" D x 18" W x 26" L (front/back)
             2 - 37" D x 18" W x 26" L
             2 - 26" D x 18" W x 26" L
          
          14 - Genesis 4G - 500 - 6 Generators
          
          2 - Automatic Load and Unload Arms
          
          US Filter Closed Loop Filtration System
          -Automatic Material handling w/ dual-headed Crest CTS-1000 AB5 Free standing
          
          robot-type transport unit
          -Robot capacity: 70 lbs / basket
          -Lift speed is adjustable from 5 - 20 FPM
          -Baskets - 24" L x 15" W x 18" D (double stack)
          -Manuals & Schematics
          -Spare parts/generators
          
          More pictures available upon request
          
          -Electrical Cabinet:  15" x 73" x 75" 200 lbs
          -4 Bin Parts Washer: 127" x 46" x 43" 4,000 lbs
          -2 Bin Parts Dryer: 92.5" x 46" x 43" 4,000 lbs
          -Rolling Conveyor: 108" x 22" x 30.5" 500 lbs
          -Rolling Conveyor: 150.5" x 22" x 36" 500 lbs
          -Load Robot: 20.5" x 16.5" x 78" 1,000 lbs
          -Un-Load Robot: 20.5" x 16.5" x 78" 1,000 lbs
          -(2) Robot Guideways: 165" x 29" x 17.5" 2,500 lbs (condensed dimensions)
          -Generator Station: 44" x 19" 26.5" 500 lbs
          -Table: 56.5" x 36" x 31" 50 lbs
          -Crate of Misc.: 39.5" x 31" x 33.5" 250 lbs
          
          
          Note:  Box of Tools and Box of Generator stuff to ship inside crate, etc. when
          ship
          
          CHECK WITH WAREHOUSE WHEN SHIPS AS ALOT OF THE ABOVE CAN BE CONDENSED ....
          
          TOTAL WEIGHT FOR TRUCKING WILL BE APPROX. 18,000 LBS 40' FLAT BED TRUCK
          
          NEEDED!
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com