Click the link below to view a video demonstration of this machine
          https://www.youtube.com/watch?v=P85C9T8Ybo8
          
          ******************************************************************************
          *                                                                            *
          *              Click on the photo (Top Right), then open & view
          
          *
          *            the PDF file for full Ganesh Specifications & Options
          
                           *
          *                                                                            *
          ******************************************************************************
          
          
          
          Featuring:
            Class-7 Super Precision Fafnir Spindle Bearings
            5-Horsepower Variable Speed Head
            80 - 4,000 RPM Spindle  Speeds (5,000 RPM Inverter Spindle Optional)
            Square Box Ways on Knee & Column - Y & Z Axis
            1.5-Horsepower Knee Power Feed Motor
            Automatic Lubrication System for Slideways and Leadscrews
            Hard-Chrome Plated Quill
            40-Taper Spindle
            1-Year Warranty
          
          General Specifications As Per Brochure (must be verified by buyer):
          
          STANDARD GANESH GMV-4 MACHINE SPECIFICATIONS:
          
          
          TABLE:
          Table Size:                             12" X 54" (254mm X 1372mm)
          Table Travel / (With Power Feed):       36" (914mm) / 32" (812mm)
          Table Capacity:                         1200 lbs
          T-slot width (3 Ground T-Slots):        5/8" with ground reference edges
                                                  (15.9mm wide)
            
          MACHINE TRAVELS & CAPACITY
          Table Travel - X axis/(With Power Feed):36" (914mm) / 32" (812mm)
          Cross Travel - Y axis:                  16" (400mm)
          Knee Travel - Z axis:                   16" (406mm)
          Ram Travel:                             17.7" (450mm)
          Spindle Nose-to-Table TravelL:          2" - 18" (50 - 457mm)
          Quill Travel - Manual & Power Feed:     5" (127mm)
          Quill feeds - With Trip Release:        0.0015", 0.003", 0.006" (0.038mm
                                                  0.076mm, 0.152mm) 
          Quill Diameter:                         4.13" (105mm)
          Leadscrews with ground pitch (X & Y):   200" per rev. (5mm) (ballscrews
                                                  available)
          Adjustable scale ring resolution:       0.001" (0.0254mm)
          
          Slide Ways:                             Hardened & Ground Meehanite Cast Iron
          Longitudinal Table - Z Axis:            Hardened & ground dovetail ways
          Cross Slide to Knee - Y Axis:           Hardened & ground square box ways
          Knee to Column - Z Axis:                Hardened & ground square box ways
          
          SPINDLE HEAD
          
          Head tilt (Left-to-Right):              90 - 0 - 90 degrees
          Head tilt (Front-to-Back / Up-Down):    45 - 0 - 45 degrees
          Head Swivel:                            360-degrees
          Spindle Motor:                          5-HP, 3-Phase 208-240 vac 
                                                  (5-HP option)
          Spindle Taper:                          40-taper 
          Spindle Runout:                         0.0002" maximum runout (0.005mm)
          Spindle Bearings:                       Fafnir ABEC-7 matched set of 
                                                  Class-7 bearings
          Variable Speed Drive - Dual Range:      80 - 520 rpm (low-range) / 
                                                  600 -4000 rpm (high-range)
          
          Note: 5,000-RPM Electronic Variable-Speed Spindle available with the optional
          
          AC Inverter Spindle Head
          
          DIMENSIONS & WEIGHT
          Power Requirements:                     3-Phase 220 vac @ 44-amps 
                                                  (440 vac optional)
          Coolant Capacity:                       11-Gallons (41 liters)
          Machine weight:                         3528 lbs
          
          THESE BASIC ACCESSORIES ARE INCLUDED WITH EACH MACHINE - A $3,500 VALUE
          Motorized Knee Power Feed               $1,295  Value
          Spring Loaded Way Covers                $  495  Value
          2-Cooling Fans in Spindle Head          $  395  Value
          Halogen Work Light                      $  395  Value
          Automatic Lubrication System            $  295  Value
          Coolant Pump & Nozzle                   $  495  Value
          Coolant & Chip Tray                     $  295  Value
          (Hi-Torque 1.5-HP knee powerfeed included with each machine)
          
          For full quote with option list & pricing details, etc, please open the
          attached pdf file.
          
          Machine:  65" x 66" x 90" 3,550 lbs
          Immediately Available
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com