General Specifications As Per Brochure (buyer to verify details)
          
          To view a video demonstration of this machine, copy any paste the link below.
          https://www.youtube.com/watch?v=NuCW58rZFzQ&feature=youtu.be
          
          Equipped With:
            Fanuc Series 21i-TB Control
            S Robo-7 Gantry Loader 
            Coolblaster 2000 PSI High pressure pump
            Mist collector 
            Wasino NC Bar32 Bar Loader, 3ft cap. 
          
          Hours
            Power on ............... 23191 hours
            Operating Time .........  4269 hours
            Cut Time ...............  6069 hours
          
          
          Capacity:
            Maximum Swing Dia:                     11-7/32"
            Nominal workpiece D x L:               3-15/16" x 3-15/16"
            Bar Capacity:                          1-1/2"
          Head Stock:
            Center height from floor:              39-3/8"
            Spindle nose:                          3-15/16" Flat
            Spindle bore:                          1-3/4"
            Spindle front bearing ID:              2-15/16"
            Spindle speeds:                        6000 RPM; Infinitely Variable 
            Standard Chuck:                        Thru hole hydralic chuck 
          Feed Axes:
            X-axis (cross slide) travel:           18-29/32
            Z-axis (carriage) travel:              11-7/32"
            X-axis rapid traverse speed:           m/min (fpm) 12 (30.4)
            Z-axis rapid traverse speed:           m/min (fpm) 20 (65.6)
          Tool Table:
            Tooling type:                          Gang Type
            Standard tool shank:                   5/8"
            Max boring holder dia.:                25/32" (1") ---*2
            Spindle Motor output:                  5/7.5 HP
          Power Supply:
          
            Voltage, frequency:                    AC200/200 -15%, +10%
                                                   50/60 Hz +/- 1 Hz
            Power supply capacity:                 13 KVA
          
          Power on - 23191 hours
          Operating Time - 4269 hours
          Cut Time - 6069 hours
          
          Dimensions of Machine (approx.):         55" x 68" x65-3/4"
          Machine gross weight (approx.):          3850 lbs
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com