General Specifications per Brochure:
          (Specifics to be confirmed by buyer)
          
          CNC Control:                                Fanuc LH-1 (18i-TA)
          Maximum Bar Diameter:                       3/4"
          Z1-Axis Travel:                             8.21"
          Main Spindle
             Spindle Speed:                           200 to 8,000 RPM
             Indexing:                                C-Axis
             C-Axis Increment:                        0.001 Degree
          Number of Tool Stations:                    6 OD, 4 ID, 3 ID/OD BW Tools
                                                      4 Cross Driven Tools
          Tooling Sizes, OD Turning:                  5/8" Square
          Programmable Servo Axis Designations:
             Z1 Main Headstock In and Out:            8.21"
             T1 OD Tool Slide Up and Down:            5.90"
             X1 OD Tool Slide Right and Left:         2.00"
             X2 ID Tool Slide Up and Down:            7.90"
             Auxiliary Slide Motion:
             Z2 I.D. Tool Slide In and Out
              (Synchronous to Z1):                    7.88"
          Sub-Spindle Specifications:
             Maximum Diameter:                        0.787"
             Maximum Drill Capacity - Mild Steel:     3/8"
             Maximum Tap Capacity - Mild Steel:       5/16"
             Speed Range (Serial Interface):          200 to 7,000 RPM
             Power Rating:                            3.0 HP
             Sub-Spindle Indexing:                    15 Degree increment
          Part ejection:                              front or rear ejection
          Horsepower of Main Spindle:                 5.0 HP
          Driven Tool Drive Motor Rating:             1.5 HP
          Maximum Speed Cross Tool T10-T12:           200-5,000 RPM
          Maximum Speed Cross Tool T13:               120-3,000 RPM 
          Offset From Guide Bushing T10 & T11:        0.472"  (.397 max. shank)
          Offset From Guide Bushing T12:              0.965"  (.511 max. shank)
          
          Equipped With:
            Live off-center drill (1, located under the sub)
            Iemca Magazine Mini Boss 325 bar feed 
                with 28mm and 13mm channel sets
          
          Tsugami BS20BII 95" x 72" x 76" 5,500 lbs
          Iemca Boss 325 Barfeed 176" x 24" x 51" 2,250 lbs
          Pallet w/misc 34" x 28" x 16" 100 lbs
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com