General Specifications As Per Brochure. To the best of our knowledge details 
          below are deemed correct. It is the buyers responsibility to confirm prior to 
          purchase.
          
          Equipped With:
              2" Bar Capacity
              15 HP Dual Opposing Spindles
              B-Axis & Dual Y-Axis for both Front and Backworking
              36 Tool Positions w/ 18 Driven tools, 12 for B-Axis
              80 gallon coolant tank 
              Mistbuster 850 Mist Collector 
              High Pressure Collant 
              Edge Rebel V-65 Servo Bar Feeder
          
          Specifications:
          
          MAIN SPINDLE                                Integral Built-in Motor Spindle
              Maximum bar diameter:                   2.008"
              Spindle Nose:                           A2-5
              Collet size:                            Traub TRB-52
          
              Maximum spindle speed:                  6,000 RPM
              Servo Spindle motor horsepower:         15-HP peak, 10-HP 30-min. rated
          X1, Y1, Z1 AXIS
              X1, Y1, Z1 axis servo motor:            X1-1.3 hp Y1/Z1-2.0 hp
              X1 axis travel:                         10.63"
              Y1 axis travel:                         18.11"
              Z1 axis travel:                         9.84"
              Minimum programmable input:             0.00004" resolution
              X1, Y1, Z1 rapid travel rate:           1181 IPM (30m/min)
          MAIN SPINDLE TOOLING
              Number of driven tools:                 6 axial and 6 radial driven
              Driven tool motor power:                5-HP
              Driven tool spindle speed:              6,000 RPM
              Driven tool collet size                 ER-20 (up to 1/2" tool shank)
              O.D. turning tools                      5-20mm O.D.  holders available
              I.D. boring tools                       5-25mm I.D. bores available
          SUB SPINDLE
              Type:                                   INTEGRAL BUILT-IN MOTOR SPINDLE
              Maximum bar diameter:                   2.008"
              Collet size:                            Traub TRB-52
              Maximum spindle speed:                  6,000 RPM
              Servo Spindle motor horsepower          15-HP peak, 10-HP 30-min. rated
          X2, Y2, Z2 AXIS
              X2, Y2, Z2 axis servo motor:            X2/Z2-1.3 hp/Y2-2.0 hp
              X2 axis travel:                         18.89"
              Y2 axis travel:                         18.11"
              Z2 axis travel:                         10.63"
              X2, Y2, Z2 rapid travel rate:           1181 IPM (30m/min)
              Minimum programmable input:             0.0001"
          SUB SPINDLE TOOLING
              Number of axial driven tools:           3 axial, uses ER-20 collets
              Number of radial driven tools:          3 radial, uses ER-20 collets
              Driven tool motor power:                2.7-HP (2.0kw)
              Driven tool spindle speed:              6,000 RPM
              Driven tool collet size:                ER-20 (up to 1/2" tool shank)
              O.D. turning tools:                     4-20mm O.D. holders available
              I.D. boring tools:                      #4 - 25mm I.D. bores available
          COOLANT SYSTEM - 300 PSI                    
              Size:                                   80 Gallon tank,
              Pumps:                                  3 pumps with flow control
          ELECTRICAL REQUIREMENT                      110-Amps,42kva,220 vac, 3 Phase
              AIR REQUIREMENTS:                       85 psi, 20-cfm
              MACHINE WEIGHT:                         12,345 LBS
              MACHINE DIMENSIONS:                     142" x 85" x 82" w/ chip conveyor
          
          GenTurn 52-BY2 9-Axis Mill/Turn Center - Production Package
          9-Axis Turning Center with B-Axis, and both Dual "Y" Axis & "C" Axis,
          
          including: 
          2-Traub-52 "Dead-Length" collet chucks. Automatic power shut-down. 
          36-Tool positions including 18-Driven Tools with ER-20 collet spindles
          
          included, 
          Parts catcher with parts conveyor, chip conveyor, fluorescent worklight 
          Barloader interface, headwall air blast and coolant outlets for main and sub
          
          spindle, 
          Sub-Spindle programmable air blast, oil flush, and finished parts ejector 
          215 PSI High-Pressure coolant pump for cutting tools with coolant flow sensor
          
          monitor. 
          Dual 1-HP coolant pumps for headwall & chip flush with coolant flow sensor
          
          monitoring. 
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): kristen@automatics.com
Web: www.automatics.com