To the best of our knowledge all details listed below are deemed correct.
          It is the buyers responsibility to confirm ALL details prior to purchase.
          
          Equipped With:
             Headstock Clutch
             Removable Gap
             Hardened and Ground Single Piece Bed Casting
             Hardened and Ground Cross Slide Ways
             Universal Gearbox w/ Safety Clutch
             4-Position Tool Post
             2-Speed Hardened and Ground Tailstock Quill
             Low Volt Controls
             6-Way Rapid Traverse
             Flood Coolant System
             Automatic Lubrication to Bed & Cross Slide Ways
             Electro-magnetic Spindle Break
             Halogen Work Light
             Thread Chasing Dial
             Steady Rest w/ Roller Jaws
          
          General Specifications:
             Swing Over Bed:                        45.9"
             Swing Over Cross Slide:                33"
             Swing Over Gap:                        63.4"
             Center Height:                         23.2"
             Gap Width From Headstock:              23.6"
             Spindle Bore Diameter:                 6"
             Distance Between Centers:              160"
             Main Spindle Motor:                    30 HP
             Spindle Speeds (18-Speed):             5 - 630 RPM
             Bed Width With, w/o Auxiliary Guide:   28.1", 31.5"
             Cross Slide Travel:                    31.5"
             Compound Rest Travel:                  19.7"
             4-Way Tool Post Width:                 10"
             Longitudinal Feed:                     0.0018" - 0.1" IPR
             Cross Feed:                            0.0009" - 0.05" IPR
             Longitudinal Rapid Feed:               78.7 IPM
             Cross Rapid Feed:                      50 IPM
             Tailstock Quill Diameter:              5.7"
             Tailstock Quill Travel:                7.9"
             Tailstock Quill Inner Taper:           MT #6
             Tailstock Bearing Surface of Bed Ways: 23.6"
             Electricals:                           480V / 3 ph / 60 Hz
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): blandon@automatics.com
Web: www.automatics.com