Specifications from OEM brochure and equipped with are described to the best
          
          of our knowledge. ALL items should be verified by buyer.
          
          Equipped With:
             Control Cabinet
             6-Processing Stations
             Load & Off-Load Station
             Rigibot Transfer System 
          
          General Specifications
             Station #1:       Load Conveyor
             Station #2        Ultrasonic Wash; 58x20x22"D tank 
                               8000W @ 40KHz, heaters 16KW
                               10GPM Recirc, 25 Micron Bag Filter, 10 Micro Cat Filter
             Station  #3:      Ultrasonic Wash; 29x20x23"D tank
                               4000W @ 40KHz, heaters 9KW
                               10 GPM Recirc, 25 Micron Bag Filter, 10 micron Cat Filter
             Station #4 & #5:  Ultrasonic Rinse; 29x20x23"D tank
                               4000W @ 40KHz
                               12KW Heater
             Station #6:       Steam Rinse; 29x20x22"D
             Station #7:       Dryer with Power Lid; 
                               3600 cfm Blower, 20kw Heater
             Staiton #8:       Unload Conveyor 
          
          Overall length of unit w/ control:        441"L x 55"D x 84"H
          
          ====================================
          
          Information collected from Crest:
          
          What frequency are the ultrasonic generators capable of?  The system has 40
          
          kHz.  Other frequencies 58 and 132 kHz could be used but tanks and generators
          
          would need replacement.
          
          Can they accommodate multi frequency sweep recipes/programs?  All frequencies
          
          mentioned are the resonate frequencies built for the specific transducer.  The
          
          generator sweeps the frequency around the resonance +/- 2kHz to prevent
          
          standing waves.  
          
          What chemistry or process was on the system previously (what chemicals were
          
          used, what decontamination was completed)?  The system used an alkaline PH 10
          
          cleaner designed to split off oil residual.  There is not a specific concern
          
          related to residual.  The system only needs a good flushing and should be
          
          ready to go for a new chemistry to be used.
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com