To the best of our knowledge all details listed below are deemed correct. 
          It is the buyer's responsibility to confirmed prior to purchase.
          
          
          Equipped With:
            Vertical Rack Feed
            1.665" bearing Set Currently installed
            Several Bearing Sets with Support Bushings included
              1.102" Bearing set, 1.338 bearing set and partial 1.791" bearing set.
            Pushers including 1.73", 1.31", 1.19", 1.06", 0.719" (no rotating tips)
          
          
          Originally configured for a Nakamura Tome TW250II
          can be reconfigured for any turning center with correct bar feed interface
          
          
          GENERAL SPECIFICATIONS AS PER BROCHURE
          
          Bar Diameter Capacity:                           1/2" to 3-1/8" dia.
          Bar Length Capacity:                             min. 7', max. 12' 6"
          Electrical:                                      230/460V, 60HZ, 3/1.5 amp
          Control Voltage:                                 24V DC
          Air Supply:                                      80 to 100 psi of shop air
          Hydraulic Oil:                                   22 US gal. of ISO 100 grade
          
          Barfeed:  188" x 58" x 59" 3,800 lbs
          Crate w/box on top:  121" x 18" x 27" 480 lbs
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com