To the best of our knowledge all details listed below are deemed correct.
          It is the buyers responsibility to confirm ALL details prior to purchase.
          
                   ==========================================================
          
          
          KE-NEW CONDITON.
          8 FOR $189,500.00
          AND ONLY RAN ONLY PLASTIC
          
                 ================================================================
          
          
          Equipped With:
             FMB MicroMag 20 Magazine Bar Loader, 12ft bar cap, s/n 28-0531R1617500
               Walking beam bar separation system - drops out of the way when running
                 larger diameter bars
               Complete with 2-Guide Channels (10mm & 20mm)
               Axial Shift option
             MP Systems High Pressure Coolant System, s/n NC08-30-1P-0T-150-CVPV 
             Harbor  HJ-750PSA2 Coolant Chiller s/n LC321457
             TriMist Mist Collector
             Parts Conveyor
             Chip Conveyor
             Air Blast
             Synchronous Rotary Guide-Bushing Holder 
             Non-Guide Bushing Holder (Chucker Kit)
             Parts catcher 
             Parts conveyor w/ output ramp & collection bin Cutoff confirmation sweep-
          
          arm switch 
             Sub-spindle programmable air blast and finished parts ejector
             High-Performance "C"-Axis on both the main and sub spindle 
             Rigid Synchronous Tapping
             Manifold for 4-High Pressure Oil Ports
             Cutting oil chiller system - 18K BTU's (For Machine Thermal Stabalization) 
             Coolant flow confirmation monitoring switch w/ fault interrupt interface 
             8-live-tool ER-16 collet spindles (3-not mounted)
             3-Postion Z-axis (Live Face) Tool
             Collets, TF-25: 3/8", 7/16", 1/2" 
             Guide Bushings, TD25S: 3/8", 7/16"  
             (4) Foot pads
             Manuals: Ganesh Operations, Parts, Electrical, Mitsubishi M800/M80
             Tool Box
          
          ** Machine is like New 
          ** Ran only delron 
             On-time ONLY 430 hours
          
          =======================================
          
          GENERAL SPECIFICATIONS:
          Main Spindle:
             Spindle Speed/Bearing:                 10,000 RPM/5-Bearing Spindle
             Spindle Motor:                         5 HP
             Collet Style for Main/Sub Spindle:     Hardinge TF-25S/ S&M TS-25
             Synchronous Rotary Guide Bushing:      TD25S
             Barstock Diameter:                     23mm (3/4")
             Distance Between Spindles:             23.6" (600mm)
             Spindle Centerline Height:             42" (1060mm)
          
          Main Spindle Tooling:
             OD Turning Tool Holders:               6 - 12mm
             ID Internal Tool Holders:              4 - 22mm
             ID Deep Hole Drill Positions:          2 - 22mm
             Cross Slide Live Tools:                5 - ER16 (8,000 RPM)
             Drilling/Tapping Capacity:             10mm Drilling / M8 Tap
             Cross Drilling/Tapping Capacity:       8mm Drilling / M6 Tap
          
          Sub-Spindle:
             Spindle Speed/Bearings:                8,000 RPM / 4-Bearing Spindle
             Sub-Spindle Motor:                     5 HP
             Collet Style for Main/Sub Spindle:    =Hardinge TF-25S/ S&M TS-25
             Barstock Diameter:                     23mm (3/4")
             Workpiece Length for Front Ejection:   110mm
          
          Sub-Spindle Tooling:
             OD Turning Tool Holders:               3 - 10mm
             ID Internal Tool Holders:              4 - 22mm
             ID Internal Tool Holders:              3 - ER-16 Fixed Tools (3/8")
             Sub Spindle Axiel Live Tools:          3 - RE-16 Live Tools (4,000 RPM)
             Backworking Machining Length:          6.1" Turning Length / 3.14" Boring
             Drilling/Tapping Capacity:             10mm Drilling / M8 Tapping
             Cross Drilling/Tapping Capacity:       8mm Drilling / M6 Tapping
          
          Axes:
             Main Spindle Stroke:                   9.840" Single Stroke (250mm)
             Turning Length (Rotary Bushing):       7.48 (190mm)
             Turning Length (Without Bushing):      2.36" (60mm)
             X1, Y1, Z1, X2, Y2, Z2 Rapids:         944 IPM (24m/minute)
             X1, Y1, Z1 Axis Motor Power:           1 HP
             X2, Y2, Z2 Axis Motor Power:           .67 HP
             Minimum Input Unit:                    0.0001"
          
          Power:                                    220 Volts/3 Phase/ 60hz/ 60 Amps
          
          Sold As-Is, with a start-up warranty, FCA Colorado
          
          
          Machine:  120" x 60" x 84" 6,000 lbs
          Barfeed:  230" x 32" x 54" 2,500 lbs
          Chip Conveyor:  94" x 22" x 38" 1,500 lbs
          Chip Pan 1:  55" x 48" x 13" 150 lbs
          Chip Pan 2:  49" x 37" x 19" 180 lbs
          HPC:  46" x 24" x 46" 500 lbs
          Mist Buster:  30" x 28" x 24" 225 lbs
          Oil Chiller:  27" x 23" x 59" 300 lbs
          Chip Cart:  39" x 22" x 33" 190 lbs
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com