To the best of our knowledge all details listed below are deemed correct. It
          
          is the buyer's responsibility to confirm all details and we encourage an
          
          inspection of the machine(s) and accessories prior to purchase.          
          
          Equipped With:
             Fanuc 32iB CNC Control
             10.4" Color TFT
             C-Axis Live Tooling on Main & Counter Spindles
             28 Tool Positions
             (4) Live Tools for Slide 1
             (4) Live Tools for Slide 2
             Y-Axis on Slide 1 & 2
             (6) Turning Holders 16 x 16mm on Slide 1
             (4+4) Frontal Tool Holders 25mm for Slide 1
             (4) Driven Tools on Slide 1 for ESX 20 Collet
             (4) Tool Holders 25mm for Slide Y2
             (4) Axial Driven Tools on Slide Y2 for ESX 20 Collet
             (2) Fixed Positions 25mm Beside the Counter Spindle
             Pneumatic Ejector with Workpiece Unloading Check Device
             Pneumatic Cleaning System for Counter Spindle Collet
             Angular Synchronism Between Main & Counter Spindle
             Rigid Tapping for Spindles & Driven Tools
             Helical Interpolation
             Changing Kit from Steady to Sliding Headstock
             Belt-Type Chip Conveyor (Side Exit)
             Mit for Machining with Soluble Water Coolant
             4 Colors DMG Patrol Light
             Iemca Boss 338 HD Superfast 12 ft. Magazine Barfeed
             Mist Collector
          ---------
          Note:  Oil/water and swiss vs chucker mode
          
          DMG Sprints are designed to run Water soluble or Oil as they have sealed
          
          ballscrews & bearings.
           
          DMG Sprints can run in a Swiss mode with the guide bushings or in a chucker
          
          mode without a guide bushing.
          
          General Specifications:
          Clearance
             Turning Diameter:                      1.3"
             Turning Length:                        23.6"
             Bar Diameter:                          1.3"
          
          Axes
             Number of Axes:                        8
             Number of Linear Axes:                 6
             Number of Y-Axes:                      2
             Number of C-Axes:                      2
          
          Main Spindle
             Spindle Speed:                         8,500 RPM
             Output:                                7.4 HP
             Torque:                                29.5 ft./lbs
          
          Sub Spindle
             Spindle Speed:                         8,500 RPM
             Output:                                3 HP
             Torque:                                10.3 ft./lbs
          
          Tool Carrier
             Number of Tool Carriers:               3
             Number of Tool Pockets:                28
             Driven Tool Speed:                     6,000 RPM
             Output:                                1.3 HP
             Torque:                                2.2 ft./lbs
          
          Cutting Hours:                            1,175
          
          Machine Weight:                           7,826 lbs
          Space Needed for Machine:                 30.1 Sq. Ft.
          
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): mike@automatics.com
Web: www.automatics.com