You can see a video of this machine at
          https://youtu.be/WgdZBV0DlK8
          
          All Specifications are from OEM Brochure, Buyer should confirm all details:
          
          
          Equipped With:
          Fagor CNC Control
          Hand Control
          3-jaw chuck
          12 position turret mounted on Cross Slide
          Tailstock
          
          Specifications:
            Swing over bed:                    20" / 500mm
            Swing over cross slide:            11.5" / 292mm
            Swing over gap:                    28" / 710mm
            Length of gap:                     12" / 300mm
            Hole thru spindle:                 3.312" / 85mm
            Spindle nose:                      D1-8
            Cross slide travel:                15"/ 380mm
            Longitudinal travel:               51.125"/1300mm
            Center Distance:                   60"
            Bed width:                         13" / 330mm .
            Spindle speeds (ranges):           30-2000RPM (3)
            Spindle speeds within the ranges   30-130/130-440/440-2000
            Feed rate z-axis                   0-400 IPM / 0-10000mm/min
            Feed rate x-axis                   0-250 IPM / 0-6350mm
            Ballscrew diameter z-axis          1.5"/ 38mm
            Ballscrew diameter x-axis          1" / 25mm 
            Z axis servo                       1.4 HP/1 KW 
            X axis servo                       1.4 HP/1 KW 
            Tailstock quill dia.               3" / 76mm 
            Tailstock quill travel             6.25" / 160mm 
            Tailstock taper                    MT #5 
            Spindle motor                      15 HP / 11 KW 
          
          Machine:  114" x 68" x 81" 6,600 lbs
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com