"To the best of our knowledge all details listed below are deemed correct. It
          
          is the buyer's responsibility to confirm all details and we encourage an
          
          inspection of the machine(s) and accessories prior to purchase."          
          
          
          Equipped With:
               FMB Turbo 338  Magazine Bar Loader, 12' cap. 
               Part Conveyor
               Chip Conveyor
               High Pressure Coolant
          
          Run Time Approx 17,800 hours (1-shift/day)
          
          
          General Specifications from Manufacturer's Brochure:
          Control:                               Fanuc 0i-TD
          
          Axes:                                  X1, Y1, Z1, X2, Z2, C1, C2
          Working barstock diameter:             8 - 32mm
          Max Machining Length:                  100mm
          Max Main Spindle Drill Diam:           13mm
          Max Main Spindle Tap Diam:             M12
          MAx Back spindle chucking diam:        38mm
          Max. back spindle drilling diameter    12mm
          Max. back spindle tapping diameter     M12
          Max. cross drilling diameter           10mm
          Max. cross tapping diameter            m8
          Max. tool spindle slotting cutter dia. 45mm
          Max. back drilling diameter            8 (op)
          Max. back tapping diameter             M6 (op)
          Main spindle speed                     200-6000 rpm
          Back spindle speed                     100-7000 rpm
          Tool spindle speed                     200-5000 rpm
          Total tool storage cap( St/Max.: Op.)  20/31
          Tool size                              20 x 20 x 125mm
          Rapid traverse rate                    45m/min X1, Y1
                                                 24 m/min Z1
                                                 32m/min X2
          Controlled axes (linear axes)          5 
          Main spindle                           7.5 / 11kW
          Back spindle                           3.7 / 5.5 kW
          Axis                                   1.2 kW  Z1
                                                 .75 kW X1, YY1
                                                 2.5kW X2, Z2
          Cross Drill:                           1.0 kW
          
          Coolant pump                           0.4 kW
          Lubricating oil pump                   3 W
          Net weight                             4600 kg
          Power source requirment                30 kVA
          Compressed air requirement             4 MPa or above
          Air discharge rate                     100 NL/min
          Coolant tank capacity                  195 L
          Width x depth x height                 2620 x 1345 x 1970 mm
          
          Machine: 120" x 60" x 78" 10,141 lbs
          Coolant System:  43" x 24" x 38" 546 lbs
          Iemca Boss Barfeed:  114" x 33" x 52" 2,500 lbs
          Chip Conveyor:  92" x 46" x 59" 1,500 lbs
          Chip Pan:  63" x 54" x 17" 252 lbs
          Pallet w/misc:  48" x 40" x 29" 348 lbs
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com