TURBINE:
Manufacturer:................Toshiba
Power Rating:................215000 KW
Inlet:.......................104 bar (1508 psig)
Steam Flow:..................270 kg/s Max; 45 kg/s Min
Type:........................Condensing
Configuration:...............Single Casing Single Flow Impulse
Last Stage Bucket Length:....42" (Nominal)
Extractions: MP2: 22 bar, MPI: 10 bar, LP: 4.5 bar, Feed Water: 0.4 bar
Rotation:....................CCW (viewed from front of Turbine)
Speed:.......................3,000 rpm
Allowable Cycle Change:......48.5 - 50.5 Hz

GENERATOR:
Manufacturer:................Toshiba
Rating:......................250 MVA
Output Voltage:..............18 kV
Output Current:..............8019 A
Frequency:...................3 Ph, 50 HZ
Speed:.......................3000 RPM
Cooling:.....................Air to Water Cooled

The generator consists of the stator, rotor, cover, bearing and air-to-water
cooler. The stationary armature is attached to and supported by generator
base. The rotor is supported by the bearings. Air-to-water coolers are mounted
above the stator. The cooling system is completely enclosed to prevent
exposure to dust and moisture.

HISTORY:
Delivered 2009, currently stored indoors and secured, Turbine & Generator
completely sealed. Silica gel is inserted in the Turbine & Generator and
regularly replaced. Equipped with electronic monitoring sensors for humidity &
temperature with criteria from Toshiba for storage, monitoring report
generated monthly, inspection of unit every (2) weeks, thorough inspections
were done every (6) months until 2012, then yearly, inspection protocols.

Belyea Co Inc
2200 Northwood Ave Easton PA 18045-2239
Tel: 610-515-8775 Fax: 610-258-1230
Email (Request Quote): info@belyeapower.com
Web: www.belyeapower.com