UTREC NUMBER: 1166
MANUFACTURER: Yoder Manufacturing Co.
MODEL NUMBER: W15 Forming - W15 Reducing
SERIAL NUMBER: Y1352-62

SPECIFICATIONS:
Type: Refrigeration Mill, Carbon Steel
Hand of Operation: Left to Right

This machine was used to manufacture refrigeration tubes that must be
reduced to increase length and maintain wall thickness.

The tube is welded at .480" and reduced to smaller sizes

Welding Speed: 125 FPM Max., Gear In Speed, No Load
Reducing Speed: 275 FPM @ 3/16" (4.7mm)
200 FPM @ 1/4" (6.3mm)
150 FPM @ 5/16" (7.9mm)

ENTRY EQUIPMENT:
2,000 Lb. (1 Ton) Gantry Crane
2,500 Lb. (1.2 Ton) Double Uncoiler
Overhead Looper 2 Strand, approximatly 300 Feet Storage
Shear End Welder
Pinch Roll Pull Out Stand, 10 H.P.

FORMING MILL:
Entry Guide Unit
3- Driven Breakdown Stands
2- Driven Fin Passes
4- Idle Side Roll Units
1- Seam Guide Unit
1- 18,000 Amp.D.C. Welder Rotary Resistance
1- Scarfing Unit
1- Coolant Section
1- 20 H.P. D.C. Motor

REDUCING (Sizing) MILL:
9- Driven Reducing Stands
9- Idle Side Roll Units
1- Straightener Stand
9- 7.5 H.P. D.C. Motors

1- Dual Pass Annealer Section with Cutler Hammer Controls

D.C. DRIVE SYSTEM:
1- Walco Solid State D.C. Drive System, with Culter Hammer Controls
Voltage 380/3/50

Tooling to produce the following Sizes:
3/16" (4.7mm) - 1/4" (6.3mm) - 5/16" (7.9mm)
All Produced From 1/2" Welded Tube

Universal Tube & Rollform Eq
26202 Glenwood Rd Perrysburg OH 43551-4878
Tel: 419-872-2364 Fax: 419-874-2825
Email (Request Quote): sales@utubeonline.com
Web: www.utubeonline.com