ONE LIKE NEW QUICKSILVER 5- AXIS, 6 SIDED MACHINING CAPABLE, TRAVELING COLUMN GANTRY TYPE VMC, MODULARLY DESIGNED FOR EXPANSION OR REDUCTION
Machine was used to machine Carbon Fiber 30-40 meter Wind Generator blades
Model: Q13053RMDL
Original Travels:
X: 30,500 mm, 1200.78”, or 100’
Y: 5,000 mm, 196.8”, or 16.4’
Z: 3,500 mm, 137.7” or 11.48’
Actual travels: 127’ x 24’ x 6’
Rapid traverse in X, Y, and Z: 30,000 mm/m or 1,181 ipm
Rated accuracy: .005” at Total system accuracy
C axis: A-axis
Rotation: or minus 225 degrees or minus 100 deg
Max. speed cont: 72 deg/sec @ 3,000 rpmsame
Max. speed positioning: 110 deg/sec@3K119 deg/sec @ 3,000 rpm
Max. torque continuous: 300 Nm/221 ft. lbs.260 Nm/191 ft. lbs.
Max. torque non-cont: 370 Nm/272 ft. lbs.same
Spindle: PDS Mfg. with Yaskawa servo motors in HSK63-F or ISO30
Spindle has “Force Sense Feedback” for drilling or machining thru multiple layers of different materials to help minimize burrs
Spindle speeds: Open to what your needs are
Power: 370 Nm (YOUR CHOICE)
Spindles are interchangeable; so if you went from machining a mold, you could change the spindle out for the dispensing of mold agents, than put a buffing or polishing spindle in, etc.

ATC: 24 place and expandable

Pre loaded dual rack and pinion with AC servo motors that feed back to each other to maintain accuracy

HIM Controller: Color screen, Cam-Soft platform, PC based conversational. System accepts virtually any solid or surface file format for programming. Customer configurable.
32 axis, cognitive, with Laser Inter-Proximity and built-in Temperature controls that measure heat, humidity, and barometric pressure.

Built for the aerospace, automotive, ship building, wind energy, and the pre-fab industries

Initially designed to mill wind generator blade molds and because it is built on two meter long blocks, you can expand these dimensions or reduce them as required.

Designed to machine composites and light alloys or MIG welding, assembly, dispensing mold agents, buffing/polishing, painting, and PFE automatic composite layup.

Important: This machine can reduce the number of machines required to make a part without having to transfer the part, so your accuracies remain intact.

Machine can be customized to fit your needs! Or sold as offered.

NEW 2012 - Original cost was $3,000,000.00 Asking $1 mil

One year warranty and installation-training included.

Specifications are approximate, intended solely as a guide and are not binding. It is the buyers' responsibility to inspect the goods and ascertain if the specifications, description, and condition o
the goods conform to the buyers' requirements.

Best regards, Jerry Ditter, Pres. – 847-265-1075

Ditter Industries Inc
PO Box 367 Lake Villa IL 60046-0367
Tel: 847-265-1075 Fax: 847-265-1078
Email (Request Quote): sales@ditterindustries.com
Web: www.ditterindustries.com