STANDARD CATALOG SPECIFICATIONS
Nominal lengths.................................... 48"
Nominal swing...................................... 10"
Maximum diameter work ground with 30" wheel........ 10"
Wheel and work center distances - maximum.......... 21"
- minimum.......... 8 1/4"
Coolant tank capacity, U.S. gallons................ 75
ydraulic oil reservoir capacity U.S. gallons...... 38
LCubricating oil reservoir capacity U.S. gallons.... 3 1/2"
OSteady rest, maximum work diameter accommodated.... 4 5/8"o
Swivel table adjustment L(in/per/ft/on dia.)
aMnachine length..................................... 48"
Maximum taper...................................... 48T"
M aximum taper (degrees).p........................... 4 3/4"

MP CAPACITY< GALLONS PER MINUTE>>>>>>>>>> @!
Hydraulic oil reservoir capacity U.S. gallons...... 38
Lubricating oil reservoir capacity U.S. gallons.... 3 1/2"
Steady rest, maximum work diameter accommodated.... 4 5/8"
Swivel table adjustment (in/per/ft/on dia.)
Machine length..................................... 48"
Maximum taper...................................... 48"
Maximum taper (degrees)............................ 4 3/4"

HEAD STOCK
Spindle diameter................................... 4 1/8"
Center diameter.................................... 1 3/4"
Center taper....................................... No. 14 Jarno
Work speed, AC motor......................... 50, 80, 125, 200

RPM
Work speed, DC motor............................... 30 275 RPM

FOOT STOCK
Spindle diameter................................... 2 3/4"
Center diameter.................................... 1 3/4"
Center taper....................................... No. 14 Jarno

BASE WAYS
Width flat way..................................... 2 1/2"
Width of V way, projected.......................... 2 1/2"
Lubrication............................. Automatic pressure

WHEEL SLIDE
Length of bearing ways............................. 37 3/8"
Width of flat way.................................. 5 5/8"
Width of V way, projected.......................... 4 11/32"
Lubrication............................. Automatic pressure
Automatic taped advance stroke, max................ 4"

WHEEL SPINDLE
Wheel spindle........................... 15 HP
Material................................ Heat treated alloy steel
Large bearing (LH)...................... 3 1/2" x 8 5/16"
Small bearing (RH)...................... 3 1/4" x 7 1/8"
Number of speeds........................ 3
Diameter of sheaves..................... 14 1/8" 11 15/16" 9

9/16"
Lubrication............................. Automatic flood
Reciprocation (when supplied)........... 0" 3/8"

TABLE SPEEDS
Range of speed IMP................................. 2" 240"
Number of speeds................................... Infinite

EQUIPPED WITH
Head stock (dead center).
Tail stock (lever operated).
Automatic plunge cycle.
Hand and hydraulic table traverse.
30" Diameter x 3" wide wheel capacity.
Coolant.
Electrics and controls.

SHIPPING SPECIFICATIONS
Approximate weight............................... 11,500 lbs.
Floor space...................................... 124" x 150"

***Cleaned, Painted, and Cycled

Presses For Industry Inc
20501 Hoover Rd Detroit MI 48205-1075
Tel: 313-839-9300 Fax: 313-839-9600
Web: www.pressesforindustry.com