Model/Type: Single Stage, Heated Wash
New: 1990's
Rebuilt: 2004

SPECIFICATIONS AND DESCRIPTION:
General description: This is a custom designed parts washer configured
to process parts placed on a roller feed conveyor and moved into the
wash chamber manually. The cleaning system is comprised of high
pressure spray nozzles located on all four sides of the wash chamber
- the work is pressure washed and dries in the chamber. It enteres and
exits at the same end -

Description of System Components:
Washer Section: Total number of cleaning stages: (1) heated
Chamber dimensions: 54"L x 36"W x 48"H
Overall dimensions of the unit: 60"L x 84"W x 96"H
Vertical door - operates mechanically and w/power
Spray Nozzles are 'High Pressure type located on all four sides of the
chamber
Sides: 6 vertical risers / 42 nozzles/side
Top & Bottom: 6 Risers each / 9 Nozzles per
Tank size: approx 550 Gallons
Heat - gas submersion type burner rated @ 1000 BTU
High Pressure Spray system Pump: 10 HP, Vertical type
Feed Roller conveyor / manuall feed: 36"W x 48"L
Roller conveyor inside chamber: Approx 60" L
Controls: puch button type controls, cycle and timer - LED indicators
Operator manual included
Construction: Cast iron - Tank & Upper Housings

Dry-Off chamber: Same as washer - parts will dry-off with heated air
from wash cycle

ELECTRICS: 240/480v - 3 Ph - 60 Hz - 10 HP main blower motor

CONDITION: Washer is in very good condition - setup and under power -
ready for immediate release

Industrial Resources Inc
PO Box 505 Old Saybrook CT 06475-0505
Tel: 860-388-3439 Fax: 860-388-2740
Email (Request Quote): ray@industrial-resources-inc.com
Web: www.industrial-resources-inc.com