MODEL/TYPE: 32 Stands/common base type
AGE: 1960's

SPECIFICATIONS & DESCRIPTION:
Stamco Roll former
Product the machine was producing: Heavy duty Corrugated Building
Roof panels
Existing tooling included - w/cut-off die
Machine configuration:
(8) separate Roll Forming Sections (or rafts) /units consisting of
(4) stands each/per section
As mounted on the existing rafts - the stands are approx 12"
horizontally spaced Center to Center.

Total Number of stands: (increments of 4 stands/section): 32
Design material capacity: (mild steel) 10 ga & 3/16" ga x 60" wide
Machine has only run 12 gauge material in production
Arbor / Shafts size: 5-1/4" Dia Shafts
Vertical Adjustment range: 8" - 12"
Tool spacing (max): 60"Width
Horizontal distance between Stands as configured: 14"
(center to center)
Note: Stands could be placed on different rafts or common base and
configured at different
Horizontal distances between stand centers.
Profile data: Pitch: 1.263"
Corrugation depth: 0.250" (1/4")
Radius: 0.2812" (9/32")
Double Housing Bearing type machine / Drive is a chain drive
w/sprocket assembly

Note: Feed Equipment & Cut-Off Press equipment NOT included with this
Equipment.

ELECTRICS: 50 HP main drive motor - 240/480 V / 3 ph / 60 Hz

CONDITION: Line is in good condition, removed from service in the
early 1990's - presently in storage

Industrial Resources Inc
PO Box 505 Old Saybrook CT 06475-0505
Tel: 860-388-3439 Fax: 860-388-2740
Email (Request Quote): ray@industrial-resources-inc.com
Web: www.industrial-resources-inc.com