WATERBURY FARREL 2-HI COLD REVERSING SENDZIMIR MILL ZR33-WF-18
MAX.INCOMING THICKNESS: .125" (3.18mm)
MINI.FINISH THICKNESS: .004" (.10mm)
MAX.STRIP WIDTH: 18" (457mm)
ROLLING SPEED: 0 - 380/1000 FPM (0 - 92/305m/MIN.)
AUTOMATIC GAUGE CONTROL (AGC): MASS FLOW
HYDRAULIC SCREWDOWNS
MILL DIRECTION: RIGHT TO LEFT

YEAR OF BUILT: 1979
MACHINE BUILDER: WATERBERRY FARREL
ELECTRIC CONTROL: GENERAL ELECTRIC
AGC: i2S
REVAMPING
1995: TOTALLY REVAMPED INCL. AGC
2004: TOTALLY REVAMPED
INCL. PAPER WINDER, COOLANT SYS.
ROLLING MATERIAL: STAINLESS STEEL
CONDITION: UNDER PRODUCTION

LINE CONSISTS OF:

PAYOFF:

TYPE: EXPANDING MANDREL
TYPE OF EXPANSION: HYDRAULIC
I.D. RANGE: 16"(406mm)
PAPER UNWINDER
COIL CAR
PAYOFF DRIVE: 3 HP, 17.5 RPM, GEARED MOTOR,
3 PH., 60 HZ.
COIL SNUBBER HOLDDOWN: HYDRAULIC
BACK TENSION

FEED UNIT:

PINCH ROLL SIZE: 6" (152mm) DIA. x 22" (558.8mm) WIDTH

BENDING ROLL SIZE: 3" (76.2mm)DIA x 21-3/4"(552.5mm)WIDTH
DRIVE: 5 HP, 380/460 VOLTS, 1750 RPM,

MILL

TYPE: 20-HI REVERSING HYDRAULIC SCDN
ROLL SIZE
WORK ROLL: 1.378" (35mm)
1ST ROLL: 2.008" (51mm)
2ND ROLL: 3.7008" (94mm)
BACKING BRG: 6.299" (160mm)
ROLLING LOAD: Max. 1,300 KN
ROLLING SPEED: 0 - 380/1000 FPM (0 - 92/305m/MIN.)
MILL MOTOR: 500HP, 400/1055RPM
500V, 815A, FRAME CD7582
ENTRY BILLY ROLL: WITH SPEED COUNTER
ENTRY AND EXIT WIPERS

ROLL COOLANT SPRAY SYSTEM
NOTE: TANK IS NOT SALVAGEABLE - MUST BE REPLACED BY PURCHASER
EDGE GUIDES: MANUAL AND AUTOMATIC

THICKNESS GAUGES:
MANUFACTURER: Y-RAY, I2S SUPPLY
QUANTITY: 2 - ONE ON EACH SIDE OF THE MILL.

WINDERS:

TYPE: EXPANDING MANDREL
TYPE OF EXPANSION: HYDRAULIC
DRUM SIZE: 20" (508mm) DIA. x 22" (558mm) WIDTH
COIL WEIGHT: 500#/INCH X 18 = 9,000LB
COIL SIZE: 20"/52" ( INCL. SLEEVES BY CUSTOMER)
HYDRAULIC COIL PUSH-OFF
COIL CAR
DRIVE: 400 HP, 400/1400 RPM,
500 V, 400 A, FRAME CD7582

TENSION RANGE
HIGH RANGE: 0 ~ 20,000LB UP TO 743FPM
LOW RANGE: 0 ~ 10,000LB UP TO 1,000FPM

ELECTRICAL CONTROLS:
G.E. FANUC SCR THYRISTOR CONTROLS

Additional equipment - (2) ROLL GRINDERs also included

A) LANDIS - SIZE: 10' X 48'

B) CINCINNATI - SIZE: 10' X 50'

SPARE PARTs included -:

BACK UP ROLL: 3 SET
(SADDLE OF B, C SHAFT 1 SET EXTRA)
(NEW BRG. 15PCS EXTRA)
2ND ROLL(IDLE): 32PCS
2ND ROLL(DRIVE): 130PCS
1ST ROLL(UPPER): 36PCS
1ST ROLL(LOWER): 36PCS
WORK ROLL: 170PCS
SPOOL: 42PCS
PORTER BAR: 2 SET
STRIP GUIDE: 2SET

Condition: Mill is in good condition - Currently set up and under
power.

Industrial Resources Inc
PO Box 505 Old Saybrook CT 06475-0505
Tel: 860-388-3439 Fax: 860-388-2740
Email (Request Quote): ray@industrial-resources-inc.com
Web: www.industrial-resources-inc.com