52" TIME-SAVER INLINE COIL POLISHERQUOTE# 29-26
And Q# 107-35

MODEL/TYPE: 52” Bottom-side coil polisher AGE: 1970s

General operation: This is an in-line heavy duty coiling polishing machine that polishes the bottom side of the coil as it passes thru the machine – There are no coil feed or coil return compon
nts included – this polisher is typically inserted into an existing coil processing line where the under or bottom-side of the coil is polished.

As a separate coil polisher: This machine could operate as a bottom side coil polisher outside an existing coil processing line provided both feed and exit coil handling components were added.

As a sheet polisher: This machine could process a separate sheet provided vertical tension or pressure device was added to the machine to hold the sheet in place as it passed thru the machine –

SPECIFICATIONS & DESCRIPTION:

Design:Equipped with (2)5” Dia Idler rolls – one before & one after the Driven Belt Roll
(1) 11-1/2” Dia grooved/serrated Driven Belt Roll –
Belt Roll accommodates the Polishing Belt
Polishing belt dimensions (approx)50” x 103” Long
Most any grit belt could be run in this machine depending on the degree of finish desired
Feed:Machine feeds either Left to Right or right to Left
Coil is fed thru the machine Horizontally or Flat to the floor
Polishing is performed on the bottom of the coil only
Construction: Machine is welded frame construction – heavy duty type – gross weight – approx 9500#
Overall dimensions:approx:66” W x 40” H x 64” F–B

ELECTRICS:50 HP Main Drive Motor 480 VAC 3 Ph 60 HZ

Industrial Resources Inc
PO Box 505 Old Saybrook CT 06475-0505
Tel: 860-388-3439 Fax: 860-388-2740
Email (Request Quote): ray@industrial-resources-inc.com
Web: www.industrial-resources-inc.com