CUSTOM 3-Stage IN-LINE PAINT SYSTEMQuote# 75C-678

Model: 36” x 60” Part DP System ReMfg 2015

System components: 3-Stage Washer, Dry-Off & Cure Combi-oven - gas w/recirculated hot air, Monorail O/H conveyor system, & numerous Accessories

System Parameters:
Design part size: 60” H x 36" W x 72” L - Designed line speed: 2-4 FPM / Basic System
Foot Print: approx: 50’ x 100’ / No Application or Coating Booth Included (Available as an Option)

Pretreatment System: 3-Stage – SST steel construction - Overall length: Approx 20’
Stage #1 – approx 6’L, Heated Phos. Wash – approx 140 F temp, natural gas immersion tube burner, approx
700 gallon tank
Stage #2 - approx 2-1/2’ L, Ambient Rinse –
Stage #3 - approx 1-1/2’ Ambient Rinse/seal –
Controls: Honeywell or similar type controls
Note – all tanks equipped with vertical gusher type HD pumps and filter screen, entrance & exit vestibules w/
Exhaust blowers, 16” Dia exhaust stacks, OAD: 7’W x 9’H x 20’ Long (approx) – approx 2’ drains

Dry Off & Cure Combi Oven: Dimensions: Approx 26’ W x 26’L x 10’ H / side located burner box
Temp range: 200 – 450 F
Dry-off section:
Single pass, serpentine pass thru design rated @ 400 F, Re-circulated Hot Air blower,
(5”) insulated panel construction / equipped with exhaust blower
Curing section:
Multi-pass serpentine Pass thru – inside track configuration – approx 60’ track inside cure chamber
Rated temp: 400 F – Recirculated Hot air gas fuel burner system w/Hot-air Blower system, insulated interlocking panel construction, Approx OAD: 7’ x 7’ H x 40’ L / exhaus
blower –side-mounted burner box & controls

Overhead Conveyor –

Enclosed track overhead monorail type. Approx OAL: 250’
Equipped with a Vari-speed Drive with line speeds from 2-4 FPM, work Hooks spaced on 24”
centers, Pneumatic take-up, 75# hanger load cap, designed line speed (4 FPM), OA chain length: 250’
Horizontal and vertical curves designed on 24” Radius, Auto chain lube system and conveyor Lube &
Track cleaner units

System and Equipment Options:

Note: The system could be modified and customized to meet the customer’s exact requirements should a faster line speed and/or a larger work envelope be required. Washer construction changed to
‘mild Steel’ or Poly and more stages added, etc. All components in the system are remanufactured or built ‘New’ and come with a warrantee –Application Booth are available as
n option: Wet or Dry Powder type – No application equipment

Industrial Resources Inc
PO Box 505 Old Saybrook CT 06475-0505
Tel: 860-388-3439 Fax: 860-388-2740
Email (Request Quote): ray@industrial-resources-inc.com
Web: www.industrial-resources-inc.com