JR GREEN IN-LINE PAINT LINE – WET OR DRY POWDER QUOTE# 75C-682

MODEL/TYPE: Custom designed – 48”W x 90”H x 12-16’L Parts AGE: New 2000

The line consists of a power & free overhead monorail conveyor system, work load-bars, pre-treatment washer, dry-off oven and an in-line Cure oven chamber.
NOTE: They system originally contained a large environmental room with (3) in-line automatic powder booths – none of this equipment is available or included in this line.

DESCRIPTION OF LINE COMPONENTS:

Basic Line Capacity:
Designed Load Bar cap/work envelope: 48”W x 90”H x 21’L w/48” Conv. Drop
Work openings thru the washer & ovens:48” W x 90”H
Designed work ‘L’ thru turn radius- in the ovens:21’ L (approx)
Designed load factor1000#

Power & Free Monorail system – OEM: Unibilt Conveyor systems Approx 1300’ OAL
Supported from ceiling – clear clearance at floor level / no support stantions
Designed speed – variable from 10 – 16 FPM(1) drives – 2 HP each
4” HD Chain - Hangers located on 24” centers
Equipped with an auto lube device and chain cleaner

Washer - Pre-treatment System: 6-stage, in line – all SST construction (304 type) – approx 180’ OAL
Washer tunnel: 90” W x 12’0”H above tanks, Drain-backs throughout, dwell times below based on 15 FPM:
Stage #1: Heated Alk pre-wash (140F) 4000 gal, 60 seconds, 330 nozzles
Stage #2: Heated Alk Wash (140F) 6000 gal, 90 seconds, 506 nozzles
Stage #3: Ambient Rinse, 2000 gal, 40 seconds, 220 nozzles
Stage #4: Heated Iron Phos soak, (120F), 4000 gal, 120 seconds, 330 nozzles
Stage #5: Ambient Rinse, 2000 gal, 40 seconds, 220 nozzles
Stage #6: Final Ambient Rinse, 2000 Gal, 40 seconds, 220 nozzles
All PVC and adjustable poly nozzles and risers used throughout, vertical gusher pumps, tank skimmers & drains

Dry-off Oven: ‘L’ configuration: 50’L 72’L – Gas fired, convection – recirculated Hot air
Designed operating temperature: 300F / typical operating temp for water drying: 150F
Construction: 6” thick aluminized interlocking steel panel construction – double wall design
Tunnel dimensions: 7’6” W x 15’6”H
(1) Maxon OvenPak gas burner rated @ 2.5 M BTU
Honeywell UDC 2000 series controls
5 HP Recirculation blower system rated @ 35000 CFM and exhaust blower rated @ 5000 CFM

Industrial Resources Inc
PO Box 505 Old Saybrook CT 06475-0505
Tel: 860-388-3439 Fax: 860-388-2740
Email (Request Quote): ray@industrial-resources-inc.com
Web: www.industrial-resources-inc.com