 |
Subscribe to RSS
SITE HELP? 973-625-9292 EMAIL
|
|
 |
0P0248
PAINT SYSTEMS & EQUIPMENT(Including Powder Coating Lines)
TechtroniX, No. E-coat, 2'x6'x6' cap - Continuous monorail Cathodic type E-coat System - 6 FPM, Gas Cure, 11 -stage pre-treatment, 3 P.R., WT/RO Sys New 2004
Ref:
75c690
THERMTRONIX CATHODIC E-COAT SYSTEM QUOTE# 75C-690
MODEL/TYPE: 2 X 5 Part - TTX & CONTINUOUS New: 2004
General description:
This is a TectronicX - continuous (not indexing) Electro-Deposition Coating System which includes an eleven station pre-treatment system, a cathodic type E-coat dip coating unit and a 3-station pos
-rinse system, overhead gas curing oven, a lab testing/processing station, automated 3 monorail material handling system, a complete waste treatment with R-O capability and all related componen
parts and accessories for a complete e-coat coating system
General System Parameters:
Designed part capacity:24DOT - W x 60 H x 60 L (Horizontal)
Designed line speed:6.6 FPM
Overhead monorail system type #348 chain open channelWork load Bars
Heavy duty drives vari-speed, pneumatic take-up, chain lube and cleaners
Gas Cure oven located over the e-coat sectiondesigned for 40 minutes of cure @ 375F
Designed for 6.6 FPM - 4 passes inside oven
Complete waste-water treatment system
Includes R-O section
Floor space - foot-print: approx:60 W x 180L x 56 OAH above floor
Note: footprint includes the waste-water treatment system
Zinc Phosphate Pretreatment System & E-coat Dip Tank
Stage 1 - spray clean - 90 sec. @ 160 degrees F Stage 2 - Immersion clean - 114 sec @ 160 degrees F
Stage 3 - Spray rinse - 36 sec. amb.
Stage 4 - Immersion rinse - 32 sec - amb. Stage 5 - Immersion conditioner - 45 sec. - amb.
Stage 6 - Zinc Phos. - 128 sec. - 135 degrees F Stage 7 - Spray rinse - 36 sec. amb.
Stage 8 - Immersion rinse - 45 sec. amb. Stage 9 - Spray seal - 36 sec. - amb.
Stage 10 - Immersion RO - 45 sec. amb. Stage 11 - Spray RO - 18 sec. - amb.
Stage 12 E-coat - Cathodic Dip Tank - tubular type anodes
Post Rinse section:
Stage 13 - Spray permeate - 36 sec.
Stage 14 - Immersion permeate - 45 sec.
Stage 15 - spray permeate - 38 sec
Industrial Resources Inc
PO Box 505
Old Saybrook CT 06475-0505
Tel:
860-388-3439
Fax:
860-388-2740
Email (Request Quote):
ray@industrial-resources-inc.com
Web:
www.industrial-resources-inc.com
|
|
|  |
|
 |