Technical details
Stroke 10"
Number of spindles per slide 1
Cap. in Steel 1/2" diameter
Spindle speed range -
(6 distinct speeds attainable by belt changes)
1800 RPM 4300 RPM
2400 RPM 5700 RPM
3200 RPM 7600 RPM
Spindle drive H.P per spindle
3 HP / 3600RPM
Standard feed range 1/2 IPM - 8 IPM
Rapid retraction rate 100 IPM
Feed motor (D.C) 1/2 HP / 1800 RPM
Spindle nose drive 3/4" diameter
Coolant System Specifications

Max. coolant pressure 1000 PSI
High pressure pump motors 5 HP each
Tank capacity 400 Gallons
Transfer pump horsepower 2 HP

Accessories
Chip management system
High pressure coolant and filtration system


Other information
2-2 Spindle Gun Drillers -
Precision gund drilling machine comprised of two machine bases with two independent drilling spindles per base; with a high pressure coolant and filtration syste. Behind the 2, 2 spindle gun
drillers is one system that supports both gun drillers. This one system is for chip management, coolant reservoir, pumps, heat exchanger etc. The chutes for the chip management can be seen
in picture 7, you can see multiple chutes ending over part of the coolant reservoir.

Machinery Marketing Intl
1101 W Monroe #1a Chicago IL 60607
Tel: 312-226-4150 Fax: 312-226-4155
Email (Request Quote): linda@mmi-auction.com
Web: www.usedequip.com/mmi