MACHINE# 13354
          
          1.SPECIFICATION
          MATERIAL : STAINLESS STEEL
          TENSILE STRENGTH : 30~75KG/mm2
          HARDNESS : HV130~240
          STRIP THICKNESS : 0.08(0.05)~0.3mm (0.003"/0.0002"- 0.012")
          STRIP WIDTH : 500mm~1067mm (19.6"- 42")
          COIL DIAMETER :
          - ENTRY DIA. 508mm (20") DIA. 1710mm (67" O.D.
          - EXIT DIA.  508mm (20") DIA. 1350M (53") O.D.
          COIL WEIGHT : ENTRY MAXIMUM 8.4 TON , EXIT 7.5 TON
          LINE SPEED : MAXIMUM 110M/MIN. (360 FPM)
          DEGREASING : ORGANIC SOLVENT; SPRAY AND BRUSHING TYPE
          LEVELLER :
           STRETCHING LEVELLER ROLLS DIA. 10 x 2 EA. , NO.1 CORRECTION DIA. 10 x 2 EA.
           MULTI LEVELLER ROLLS DIA. 16 x 23 EA.
          
          2.ENTRY COIL CAR
          V-TYPE TRANSPORT CAR
          DRIVE: INVERTER MOTOR 2.2KW
          LIFTER: HYDRAULIC CYLINDER BORE DIA. 8 STROKE 540mm
          COIL SKID x 1 EA.
          
          3.PAY OFF REEL
          SINGLE MANDREL
          DRUM DIA. 475mm-508mm (18.7"- 20") DIA. 545mm (21.4"), FACE L 1,100mm (43")
          COIL DIA MAXIMUM DIA. 1,710mm (67")
          COIL WEIGHT MAXIMUM 8.4 TON
          ROTARY CYLINDER DIA. 200 x 140 STROKE
          GEAR RATIO 17/126 x 1/3.118
          DRIVE MOTOR DC22KW 400/1600RPM YASKAWA JAPAN
          
          4.WORKING TABLE
          DEFLECTOR ROLL
          TABLE W1400mm x L1780mm x H1200mm
          
          5.DEGREASING SYSTEM
          CLEAN TANK : W1430 x H2180 x L4980mm
          DRYER : W1430 x H1050 x L1820mm
          SEAL ROLLS DIA. 200 x L1150 x 4 SET
          BRUSH ROLLS DIA. 300 x L1150 x 4 EA., INVERTER MOTOR 5.5KW 200 ~ 1200RPM
          
          (CONTROL)
          BACK UP ROLLS DIA. 300 x L1150 x 4 EA.
          SQUEEZING ROLLS DIA. 200 x L1150 x 6 EA.
          DRYER FAN 146M3/MINIMUM x 225mmAq, AC MOTOR 11KW 220VAC 1760RPM
          EXHAUST FAN 20M3/MINIMUM x 100mmAq, AC MOTOR 0.75KW 220VAC 1720RPM
          CIRCULATION PUMP 184L/MINIMUM x 15M, AC MOTOR 2.2KW 220VAC 1750RPM
          RECOVERY PUMP 37L/MINIMUM x 15M, AC MOTOR 1.5KW 220VAC 1720RPM
          
          6.No.1 TENSION BRIDLE ROLLS
          3-ROLLS: URETHANE ROLL DIA. 915 x L1500 x 3 SET
          No.1 ROLL: DC MOTOR 15KW 850/1065RPM, GEAR RATIO 1/25.4
          No.2 ROLL: DC MOTOR 30KW 850/1700RPM, GEAR RATIO 1/35.5
          No.3 ROLL: DC MOTOR 30KW 850/1700RPM, GEAR RATIO 1/35.5
          
          7.TENSION LEVELLER
          STRETCHING SECTION SCREW DOWN -2.5~5mm, DRIVE GEARED MOTOR 0.75KW 62RPM
          LEVELLING SECTION SCREW DOWN 0~17.5mm, DRIVE GEARED MOTOR 0.75KW 62RPM
          SHIFTING +25~-125mm, DRIVE GEARED MOTOR 0.75KW 162RPM
          BENDING +/- 0.5mm, DRIVE GEARED MOTOR 0.75KW 162RPM
          ANTI ROLL SHIFTING 0~505mm, DRIVE GEARED MOTOR 0.75KW 162RPM
          MAKER: HITACHI JAPAN
          WORK ROLLS DIA. 10 x L1300 x 4 EA.
          INTERMEDIATE ROLLS DIA. 20 x L1290 x 8 EA.
          BACK UP ROLLS DIA. 38 x L100 x 37 EA. x 4 SET
          ANTI CREEPING ROLLS DIA. 100 x L1200 x 3 EA., DIA. 100 x L1400 x 1 EA.
          
          8.No.2 TENSION BRIDLE ROLL
          4-ROLLS URETHANE ROLL DIA. 500 x L1350 x 4 SET
          No.1 ROLL: DC MOTOR 26KW 600/1300RPM, GEAR RATIO 1/14.03
          No.2 ROLL: DC MOTOR 26KW 600/1300RPM, GEAR RATIO 1/14.03
          No.3 ROLL: DC MOTOR 11KW 1000/1500RPM, GEAR RATIO 1/19.97
          No.4 ROLL: DC MOTOR 30KW 1000/1500RPM, GEAR RATIO 1/19.97
          
          9.ROLLER LEVELLER (MULTI LEVELLER)
          6-HI MULTI FREE
          WORK ROLLS: DIA. 16 x L1250 x 23 EA.
          INTERMEDIATE ROLLS: DIA. 20 x L1250 x 25 EA.
          BACK UP ROLLS:  DIA. 25 x F22 x 486 EA.
          SCREW DOWN: MAXIMUM 6mm (0.23")
          OPEN: MAXIMUM 50mm (2")
          CROWN: +/- 0.1mm
          UPPER FRAME OPEN: 14.50
          HANDLING: HYDRAULIC MOTOR
          
          10.No.3 TENSION BRIDLE ROLL
          2-ROLLS URETHANE ROLL DIA. 350 x L1200mm x 2 EA.
          No.1 ROLL DC MOTOR 7.5KW 1150/1450, GEAR RATIO 1/11.28 
          No.2 ROLL DC MOTOR 7.5KW 1150/1450, GEAR RATIO 1/11.28
          DEFLECTOR ROLL URETHANE ROLL DIA. 350 x L1200mm x 1 EA.
          
          11.No.4 TENSION BRIDLE ROLL
          2-ROLLS URETHANE ROLL DIA. 350 x L1200mm x 2 EA.
          No.1 ROLL DC MOTOR 7.5KW 1150/1450, GEAR RATIO 1/11.2 
          No.2 ROLL DC MOTOR 15KW 1150/1450, GEAR RATIO 1/11.2
          DEFLECTOR ROLL URETHANE ROLL DIA. 350 x L1200mm x 1 EA.
          
          12.EXIT DEFLECTOR PINCH ROLL
          URETHANE ROLL DIA. 200 x L1200 x 1 EA.
          DRIVE MOTOR 1.5KW GEARED MOTOR
          
          13.TENSION REEL
          SINGLE MANDREL TYPE
          DRUM DIA. 482~DIA. 508 x L1100mm x 1 EA.
          COIL DIA MAXIMUM DIA. 1350mm
          COIL WEIGHT MAXIMUM 7.5TON
          ROTARY CYLINDER DIA. 200 x STROKE 65
          DRIVE DC MOTOR 37KW 300/1000RPM, GEAR RATIO 1/13.8
          
          14.TENSION REEL EPC
          NORTH AMERICAN 
          
          15.HYDRAULIC PUMP
          TANK CAPACITY 1000L
          PUMP 70KG/CM2 x 167L/MINIMUM, 69KPa
          MOTOR 11KW 220VAC 1150RPM
          
          16.TRANSFORMER
          MAIN: 500KVA, 3150V/230V, /Y, 91.6A/1255A
          CONTROL SOURCE: 20KVA, 220V/220V,
          
          17.DC REACTOR
          PAY OFF REEL DCL: 150A, 10Mh
          No.1 TENSION BRIDLE ROLL DCL: 400A, 3Mh
          No.2 TENSION BRIDLE ROLL DCL: 400A, 3Mh
          No.3 TENSION BRIDLE ROLL DCL: 150A, 10Mh
          No.4 TENSION BRIDLE ROLL DCL: 150A, 10Mh
          TENSION REEL DCL: 200A, 5Mh
          
          18.ELECTRIC CONTROL PANEL(YASKAWA JAPAN)
          PAY OFF REEL CONTROL PANEL : VS-505 WII, 230V 180A SCR
          No.1 TENSION BRIDLE ROLL CONTROL PANEL : VS-505 WII , 230V 420A SCR
          No.2 TENSION BRIDLE ROLL CONTROL PANEL : VS-505 WII , 230V 420A SCR
          No.3 TENSION BRIDLE ROLL CONTROL PANEL : VS-505 WII , 230V 260A SCR
          No.4 TENSION BRIDLE ROLL CONTROL PANEL : VS-505 WII , 230V 260A SCR
          TENSION REEL CONTROL PANEL : VS-505 WII , 230V 260A SCR
          MASTER CONTROL PANEL : CP-313MC YASKAWA JAPAN
          CONTROL SOURCE PANEL : NFB
          AC AUX CONTROL PANEL
          SOLENOIDE VALVE CONTROL PANEL
          DEGREASING SYSTEM CONTROL PANEL
          LEVELLER CONTROL PANEL : SERVO MOTOR 5 AXIS
          
          19.OPERATION PANEL
          MAIN OPERATION PANEL
          ENTRY OPERATION
          EXIT OPERATION
          LEVELLER OPERATION
          
          20.SPARE PARTS
          AIR CYLINDER FB125R-200-AB x 2 EA.
          
           ** SPECIFICATIONS SUBJECT TO REVISIONS **
          
           ** SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER **
          
           ** PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE **
          
          
          

Machinery International Corp
20 Commerce Dr North Branford CT 06471-1250
Tel: 203-484-0400 Fax: 203-484-4499
Email (Request Quote): sales@machyintl.com
Web: www.machyintl.com