(Used) 48" x 7" STAMCO / SECO SLITTING LINE 
          
          MACHINE 13943
          
          
          Materials:                    CR, Galv., Alum.
          Max. Coil Width:              48"
          Thickness Range:              0.010" -  0.125"
          Max. Coil Weight (Entry):     40,000#
          Max. Coil Weight (Entry):     30,000#
          Max. Shear:                   45,000 PSI
          Max. Yield:                   45,000 PSI
          Coil I.D.:                    Entry:  20" - 24"
                                        Exit:  20"
          Max. Coil O.D.:               60"
          Line Direction:               Left to Right
          Mode of Operation:            Driven / Loop
          
          Consisting of the following:
          
          -Entry Coil Car- Rex
            Mast Type
            Floor Mounted
            Self-Contained Hydraulics
            Powered Lift and Traverse
            Powered Indexing Rolls
            Machine Mounted Controls
            Cable Reel
          
          -Uncoiler:  Stamco                                                        
            Single Mandrel Type 
            Hydraulic Expansion 
            Hold-down with Powered Snubber Roll
            Slide Base 
            AC Feed-up Drive 
            Water Cooled Brake
            Water Chiller for Brake
          
          -Slitter Assembly:  Herr
            Manual Side Guides
            Idler Pinch Rolls
            7" Diameter Arbors
            Manual Outboard Retraction
            Manual Top Arbor Adjust
            DC Motor
          
          -Pit Section:
            Powered "Bomb Bay" style Cross-Over Table 
          
          -Tension Stand
            Drag Type
            Entry Separator Shaft
          
          -Recoiler:  Seco 
            Hydraulic Push-off 
            Hydraulic Expansion and Gripper
            Overarm Separator
            100 HP DC Motor
          
          Exit Turnstile:
            Two (2) Arms x 30,000# per arm
            Manual Rotation
            Powered Push-off
            Slotted for C-Hook
          
          -One (1) Scrap Winder:
            Hydraulically Powered
            Level Wind
          
          -Electrical Controls:                                             
            Main Operators Control Console
            Auxiliary Operators Stations 
            AC & DC Control Cabinets 
          
          -Slitter Tooling                                                     
            Knives- 0.500" - (27); 0.250" - (63)
            Steel Spacers- 170"
            Rubbers- 400"
            Thread Guards
            Misc. Separator Tooling
          
          -Hydraulic System
          
          Banding Line consisting of:
          
          -Downender
            6,000# x 65" O.D. Capacity
            90 Degree Discharge
            Powered Conveyor Top
            Powered Horn in/out
          
          -Powered Conveyor
            62" Wide x 16' Long
          
          -Banding Table
            60" Wide x 96" Long
            Powered Table Top with Two (2) Conical Indexing Rolls 
            Signode M20 Strapping Head with 3/4" Banding
          
          -90 Degree Conveyor
            Idler Conveyor Top
          
          -Powered Conveyor
            75" Wide x 19' Long
          
          -Removed and in Storage
          
          **Temporary Specifications Subject to Revisions**
          
          **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**
          
          **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY BUYER**
          
          
          

Machinery International Corp
20 Commerce Dr North Branford CT 06471-1250
Tel: 203-484-0400 Fax: 203-484-4499
Email (Request Quote): sales@machyintl.com
Web: www.machyintl.com