MATERIAL: STAINLESS STEEL, NICKEL ALLOYS, AND COPPER ALLOYS
TENSILE STRENGTH: 550-800 N/mm2
0.2% PROOS STRESS: 400-700 N/mm2
ELONGATION: 2.5-28%
WIDTH: 450-1050 mm
THICKNESS: 0.08-0.5 (0.8) mm
RATIO OF CROSS SECTION: 1:15
CROSS SECTION: 36-525 mm2

DECOILER
COIL WEIGHT: MAX. 10,000KG.
COIL ID: 400 mm / 500 mm WITH JAW ADAPTERS
COIL OD: 1,750 mm
DECOILING: FROM TOP

RECOILER
COIL WEIGHT: MAX. 10,000KG.
COIL ID: 508 mm
COIL OD: 1,750 mm
DECOILING: FROM TOP

PAPER COIL
ID: 76mm
OD 600mm

BRIDLE ROLLS
DIAMETER: 500 mm
WIDTH: 1100 mm

BEND-LEVELLING UNIT
MODEL: STR 200-1050/0.5(0.8)/23
LEVELLING ROLLS: 23 PCS.
DIAMETER: 16 mm
LENGTH: APPROX. 1250 mm
INTERMEDIATE ROLLS: 25 PCS.
DIAMETER: 30 mm
BACK-UPS: 9 ON TOP / 9 ON BOTTOM
BACK-UP ROLLS: 243 PCS.
DIAMETER: 33mm
ELONGATION CONTROL: 0-3%
LINE SPEED: 200 m/min
STRIP DIRECTION: FROM LEFT TO RIGHT, SIDE SEEN FROM OPERATOR DESK
CONNECTED LOAD: APPROX. 140 KVA AT 0.5 mm STRIP THICKNESS

SUPPLY VOLTAGE: 3 X 400 V./ 3 PHASE / +5% UPTO -7%/ 60 HZ AT +/-2%
CONTROL VOLTAGE 24 V DC, 230 V AC

PLC INPUTS/OUTPUTS: 24 V DC/ 24 V DC

MAIN DRIVES: DC MOTORS
AUXILIARIES DRIVES: AC MOTORS
MAGNET VALVES: 24 V DC
24 V GS: 24 V DC

HYDRAULIC PRESSURE: 120 BAR GENERALLY / 250 BAR BACK-UPS ON BEND LEVELLING

UNIT

National Machinery Exchange
158 Paris St Newark NJ 07105-3833
Tel: 973-344-6100 Fax: 973-589-0944
Email (Request Quote): sales@nationalmachy.com
Web: www.nationalmachy.com