MATERIAL................... Stainless Steel Coil
MAX COIL WEIGHT............... 40 TON (80,000#)
MAX MATERIAL WIDTH ............ 16" to 62" (406 mm to 1575mm)
MAX MATERIAL THICKNESS......... 0.018" to 0.165" (0.457mm to 4.191mm)
COIL ID..................... 20" & 24" (508mm to 610mm)
COIL OD, MAX................... 84" (2134mm)
TOP BELT GRINDING/POLISHNG HEADS..... 5
BOTTOM BELT GRINDING/POLISHING HEADS..... 2
MINERAL OIL
HYDRO FLOW "STAR" FILTRATION SYSTEM WITH SWARF COMPACTOR
CO2 FIRE SUPPRESSION SYSTEM
MAX LINE SPEED.........................100 Ft/min (30.5 M/min)
MAX PROCESSING SPEED.....................60 Ft/min (18.3 M/min)
AISI / ASM FINISHES...................... #3 & #4
ENGINEERED FINISHES......................Per Requirement in Abrasive Finishes

LINE CONFIGURATION

ENTRY SECTION
HERR VOSS COIL STAND
HERR VOSS COIL CAR
HERR VOSS UNCOILER, MANDREL TYPE, HYDRAULIC OPERATION
Paper Winder
Mandrel Expansion
Snubber Control Roll
Traversing Edge Control
Outboard Support
ELECTRONIC EDGE GUIDE
HERR VOSS PEELER TABLE / PINCH ROLL / 3 ROLL STRAIGHTENER / PINCH ROLL
CROP SHEAR / SCRAP CAR
THREADING TABLE
KENT SPLICER WELDER, BUTT OR LAP WELD
ENTRY PINCH ROLL
PIT WITH ENTRY THREAD LOOP EQUIPMENT, Hydraulic operated

GRINDING AND POLISHING SECTION
ENTRY SNUBBER/PINCH ROLL
HILL ACME GRINDING / POLISHING HEADS
(2) BOTTOM Belt type Grinding / Polishing Heads, 75 hp, 460 volt, 3ph, 60

cycle AC Motors
(5) TOP Belt type Grinding / Polishing Heads, 75 hp, 460 volt, 3ph, 60 cycle

AC Motors
Belt Size, 62" x 126"
(SPACE PROVIDED ON BASE FOR FUTURE TOPSIDE GRINDER AND HAIRLINE GRINDER)
SQUIGGY PINCH ROLLS
SQUIGGY ROLLS

CLEANING SECTION
(2) HIGH PRESSURE WASH TANKS
(2) RINSE TANKS
(2) SQUIGGY PINCH ROLLS
DRYER UNIT


INSPECTION STATION

EXIT SECTION
PINCH ROLL
EXIT PIT (ACCULULATOR) WITH THREAD LOOP EQUIPMENT, HYDRAULIC OPERATED
PINCH ROLLS
CROP SHEAR / SCRAP CAR
THREADING TABLE
ELECTRONIC EDGE GUIDE
EXIT DEFLECTOR/TENSION ROLLS
THREADING TABLE, HYDRAULIC OPERATION
HERR VOSS RECOILER, Hydraulic operation
Outboard Support
Snub Control Roll
PAPER & MYLAR APPLICATION
HERR VOSS COIL CAR
PLC Allen Bradley Controls
OA Dimension (Approx)...250' x 40'

National Machinery Exchange
158 Paris St Newark NJ 07105-3833
Tel: 973-344-6100 Fax: 973-589-0944
Email (Request Quote): sales@nationalmachy.com
Web: www.nationalmachy.com