62" (1574mm) Refurbished 2-Coat Coil Coating Line W/ Brand New Components

This is a line made up of used and brand new components with significant

multimillion dollar investment.



General Line Specifications:

Strip Width = 62" (1575 mm)
Strip Thickness = .010 - .050" (0.25 - 1.27 mm)
Material = aluminum, mild steel, galvanized, etc.
Line Speed = 300 fpm (91.5 mpm)
Coil ID - 16 & 20" (406 & 508 mm)
Coil OD - 72" (1829 mm)
Weight - 50,000 lbs (27,272 kg)
Electrics - 480-500V / 3ph / 60Hz

Line Components:
Entry Coil Car #1 with Coil Saddle - New by Globus
Uncoiler #1 - New by Globus
Entry Coil Car #2 with Coil Saddle - New by Globus
Uncoiler #2 - New by Globus
Pinch roll 1 with feed table - New by Globus
Pinch roll 2 with feed table - New by Globus
Entry Shear
Strip Joiner - Behlen Type
Deburring Unit - New by Globus
Bridle Roll #1

Entry Accumulator Tower - New - Engineering only (No Structure)
Entry Accumulator rolls & bearings - New - by American Roller / B&D
Steering Roll #1 Frame/Rolls
Steering Roll #1 Controls - New by Maxcess
Bridle Roll #2
Pretreatment Wash Sections - New by Globus
Pretreatment Rinse Sections - New by Globus
Bridle Roll #3 - New by Globus (functioning as tension leveler entry bridle)
Tension Leveler - New by Globus - Actual Flex-Roll Section
Bridle Roll #4 - New by Globus (functioning as tension leveler entry bridle)
Steering Roll #2 Frame/Roll
Steering Roll #2 Controls - New by Maxcess

Abrader - New by EFI
Bridle Roll #5
Steering Roll #3 Frame/Rolls
Steering Roll #3 Controls - New by Maxcess
Chem-Coater - Globus unit, new in 2013
Chem-Coater Oven - New by EPCON
Steering Roll #4 Frame/Rolls
Steering Roll #4 Controls - New by Maxcess
Primer Coater - 3-roll type with load cells, new 2004
Primer Oven - New by EPCON
Primer Quench
Steering Roll #5 Frame/Rolls
Steering Roll #5 Controls - New by Maxcess
Bridle Roll #6
Steering Roll #6 Frame/Rolls
Finish Coater 3-roll type with load cells, new 2004
Finish Oven - New by EPCON
Finish Quench
Steering Roll #7 Controls - New by Maxcess
Bridle Roll #7
Exit Accumulator Tower - New - Engineering only (No Structure)
Exit Tower rolls & bearings - New - by American Roller / B&D
Steering Roll #8 Controls - New by Maxcess
Exit Shear
Exit Deflector Roll
Recoiler with Coil Saddle - New by Globus
Belt Wrapper - New by Globus
Core loader - New by Globus
Exit Coil Car - New by Globus
All the GLOBUS equipment includes new motors
The EPCON ovens are complete new with fans, electrical panels and burners

National Machinery Exchange
158 Paris St Newark NJ 07105-3833
Tel: 973-344-6100 Fax: 973-589-0944
Email (Request Quote): sales@nationalmachy.com
Web: www.nationalmachy.com