Model: H310M
Motor: 2 HP
(Available in Single or Three Phase, different voltages)
Blade size, WxTxL: 1" x 97"
Blade speeds: 55-360 fpm
Blade range of speeds: Infinitely variable
Coolant Capacity: 3 gallons
Work Height: 37"
Net weight (lbs): 850 lbs

CAPACITIES:
@ 90-Degrees:
Round: 10"
Square: 9"
Rectangle: 5-11/16" x 11"

@ 45-Degrees Left:
Round: 6.25
Square: 6"
Rectangle: 4 x 7-7/8"

@ 60-Degrees Right:
Round: 5.25"
Square: 3.75"
Rectangle: 3.5 x 5-1/8"

The H310 M is a gravity feed autocut bandsaw capable of
mitering 45 to the left and 60 degrees to the right.

The cycle start button is located in the trigger switch for
safety.

The blade will tun off at the end of the cut. The solenoid
will hold the sawframe where lifted. The Autocut will
insure that each cut is feed exactly at the same rate,
eliminating the need to open and close the valve each cut.

The vise is mounted in a t slot with a quick release handle
it can be moved from either side of the cut.

Easy operator controls

Large easy to read scale ensures accurate miters

Carbide guides w/ rollers

STANDARD EQUIPMENT:
* Full Electronic Control / Information System
* Heavy Duty Drive, TEFC Motor
* 24 Volt Controls
* Heavy Duty Vari-Speed, Totally Enclosed Transmission
* Electricals to NFPA-79 Electrical Standards
* Bi-Metal Blade
* Carbide blade guides
* Sawframe setup, controlled rate & rapid approach
* Shutoff for broken blade or low tension
* Blade drive load monitor
* Full coolant System
* Operators Tools
* All Safety Guards

OPTIONAL ACCESSORIES:
AC100 Freestanding Roller Conveyor 12" x 5'
AC101 Freestanding Roller Conveyor 12" x 10'
AC300 Custom infeed/outfeed conveyor mounted to saw 12"x5'
AC301 Custom infeed/outfeed conveyor mounted to saw 12"x10'
AC303 Accu-cut material stop w/ scale 0-72" long
AC106 Vertical Guide Rollers, (set of two)
AC125 Custom worktable infeed/outfeed 6' conveyor
mounted to machine
AC103 Additional 6' for above
AC133 Custom worktable infeed/outfeed 6' conveyor
mounted to machine w/ measuring system
AC105 Additional 6' for above
AC106 Vertical Guide Rollers, (set of two)
AC118 Custom outfeed roller conveyor with Digital
measuring system, 12" wide x 12' long, with cover plates
between rollers, coolantreturn through, microadjustable
legs, mounted to machine
AC 117 Footswitch
AC 116 Built in mist coolant system

Scott Machinery Inc
4700 Lang Ave, Suite D McClellan CA 95652-6215
Tel: 916-638-7718 Fax: 916-638-2450
Email (Request Quote): sales@scottmachinery.com
Web: www.scottmachinery.com