Model: KTM-5VKF-E
Table size: 12" x 50"
Table travel (X-axis): 33"
Saddle travel (Y-axis): 18"
Knee travel (Z-axis): 17.5"
Quill travel: 5.5"
Ram travel: 26.75"
Spindle motor: 5 HP (Inverter duty)
Spindle speed: 60-550-4500 (2 range, Hi/Low)
Spindle taper: NMTB-40
Quill diameter: 4.173"
Quill feed rate: 0.0017/0.0032/0.0054" per rev
Drilling capacity (manual): 1.25" diameter
Drilling capacity (power): 0.625" diameter
Boring capacity: 8.0" diameter
Milling capacity: 2.5 in3/min
Maximum work load (center): 850 lbs
Machine Net weight: 3700 lbs
Shipping Weight/Dimension: 3800 lbs, 72" X 72" (skid)
Power Requirements: 220 volts, 3 phase, 60 Hz, 20 Amp
(optional 440v requires 10 Amp) AC-Frequency drive can
accept 220v, 1-phase power (25A) without a phase converter,
ideal for customers with only 1-phase power


FEATURES:
* 5 HP spindle motor, variable speed milling head with AC-
Freq drive head, digital RPM display and load meter
* 12" x 50" hardened and ground table top
* T-slots ground parallel to table ways
* Saddle and knee with hardened and ground square (box) ways
* Precision ground leadscrews with backlash compensating
double nut
* Precision bored&ground milling head, with super precision
ABEC-7 bearings
* Meehaniter casting, with built in coolant reservoir in
machine base
* Centralized one-shot lubrication, with metered check-
valves

OPTIONAL ACCESSORIES:
Acu-Rite 200S DRO (2-axis, 0.0002" resolution)
DRO installation charge
Table (x-axis) power feed
Saddle (y-axis) power feed
Knee (z-axis) power feed
Air power drawbar (Maxi-Torque, made in USA)
Flood coolant system (internal)
Rustlick coolant (1 gallon, mixes 1:30)
Chip Pan
Riser block (6")
Riser block (8")
Angle-lock vise (6")
Angle-lock vise (8")
Rotary table (12", vertical and horizontal)
Clamping kit (52 pc)
ER-40 Collet chuck system (15 pc)
Upgrade to 440V power

Scott Machinery Inc
4700 Lang Ave, Suite D McClellan CA 95652-6215
Tel: 916-638-7718 Fax: 916-638-2450
Email (Request Quote): sales@scottmachinery.com
Web: www.scottmachinery.com