MODEL: EN180

O.D. CAPACITY: 4-1/2"

Dimensions and Specifications
Height: 57"
Length: 60"
Width: 24"
Belt speed: 100 feet per second
Operating voltage: 220V or 440V 3ph
Min. and Max. Dia.: 1" - 4-1/2"
Motor: 3650 rpm
Angle Range: 0 to 60 degrees
Belt Dimension: 7" x 79"
Contact Wheel Optional: 5-1/4"
Weight: 650 lbs.

Standard Accessories:
1-1/4" Pipe grinding roller
3 Grinding belts
Vacuum dust extractor
Tooling for adjustments
Operator's Manual

Standard Applications:
Hand railing
Race car frames and roll cages
Fences and gates
Furniture frames
Marine bow rails and arches
Stainless tubing for plumbing, restaurants, etc.


Features
* Notches up to 4-1/2" diameters
* One movement feeds part in and across belt simultaneously

using entire belt width, increasing belt life
* Graduated vise adjust 0-60 degrees and vertically for

offset angles
* Vacuum system to minimize dust
* Converts to conventional belt grinder with optional

attachments
* Top mounted belt access for part clean-up operations
* Rapid tool-free belt changes
* Tracking adjustment for optimal belt movement
* Operator friendly control panel with low voltage controls
* 1-1/4" pipe grinding roller included
* Three grinding belts
* Vacuum dust pickup built into base
* Tooling for adjustments
* Operator's manual


The EN180 adjusts quickly to accurately notch any angle 0 to

60 degrees in pipe or tube 1" to 4-1/2" diameter in seconds.

Precise notches are easily produced in heavy or thin wall

pipe or tube, dramatically improving notching productivity

and work piece quality while reducing notching cost and

minimizing setup time. Outdated hole saws, end mills,

grinding wheels, flame cutting and post weld grinding are

eliminated. Single feed handle movement allows operator to

control in-feed and cross-feed motion simultaneously,

extending belt life and reducing heat. Quick-change rollers

available in multiple diameters to accomodate desired notch

radius. Graduated vise pivots 0-60 degrees and adjusts

vertically for offset notching. Wide frame design accepts up

to 7" belt widths. Premium abrasive belts available for a

wide range of materials, including: Carbon steel, Stainless

steel, Inconnel, Chrome Molley, Aluminum and Titanium.

Standard vacuum system built into machine base improves

operator's air quality. Access panel to topmounted grinding

surface for part clean-up operations. Rugged machine design

is ideal for production or prototype work.

Scott Machinery Inc
4700 Lang Ave, Suite D McClellan CA 95652-6215
Tel: 916-638-7718 Fax: 916-638-2450
Email (Request Quote): sales@scottmachinery.com
Web: www.scottmachinery.com