MODEL: 9680213

UPC: 726896802138

LATHE SPECIFICATIONS
LATHE MOTOR: 1PH - 115V - 13.6 AMPS - 1 PH - 60Hz
HEIGHT OF CENTERS: 4-3/4 in
MAX TURNING DIAMETER: 9-7/8 in
DISTANCE BETWEEN CENTERS: 20 in
SPINDLE SPEED: 125 TO 2000 RPM
NUMBER OF SPEEDS: 6
SPINDLE TAPER: MT3
SPINDLE HOLE: 1 in
CHUCK SIZE: 5 in
BED WIDTH: 5-7/8 in
TRAVEL TOP SLIDE: 19-1/2 in
COMPOUND SLIDE TRAVEL: 3-9/16 in
DISTANCE BETWEEN CENTER AND COMPOUND TABLE: 3 in
4 POSITION TOOL POST HEIGHT: 3-3/4 in
TAILSTOCK TAPER: MT2
TAILSTOCK SLEEVE TRAVEL: 2-1/2 in
LONGITUDIAL FEED:

0.003in/0.004in/0.006in/0.008in/0.012in/0.016in
PITCH (METRIC/INCHES) (TPI): 0.2 - 4/8 - 56
HEIGHT: 33-1/2 in
LENGTH: 49 in
DEPTH: 23 in
WEIGHT: 320
WEIGHT: 440.91 LB

MILL SPECIFICATIONS
MOTOR: 5/8HP - 115V - 10 AMPS - 1PH - 60Hz
DRILLING CAPACITY: 5/8 in
MILLING CAPACITY OF END MILL CUTTER: 3/4 in
MILLING CAPACITY OF INSERTED TOOTH CUTTER: 2-1/2 in
WORKING RADIUS: 6-3/4 in
SPINDLE HOLDING FIXTURE: MT2 3/8 in - 16 DRAW BAR
SPINDLE TRAVEL: 2 in
SWIVEL OF THE MILLING HEAD: +/- 90 degrees
GEAR STAGES: 2
LOW RANGE: 100 -1500
HIGH RANGE: 200 - 3000
Z-AXIS TRAVEL: 10-1/2 in
TABLE LENGTH: 10 in
TABLE WIDTH: 4-3/4 in
Y-AXIS TRAVEL: 4-21/64 in
X-AXIS TRAVEL: 3 in
T-SLOT SIZE/DISTANCE/QTY: 5/8 in
WEIGHT: 227.08 LB

Palmgren's combination 9 inch bench engine lathe and gear
head mill delivers the precision, power and versatility to
handle a wide range of turning, milling and drilling
operations normally found in much larger machines.

Heavy cast iron construction, smooth power transmission with
precision thrust and ball bearings in the head stock and
spindles, hardened and ground ways all designed to go give
you years of trouble-free, precise turning, milling and hold
making machining. Built and inspected to the DIN 8606
toolmakers precision lathe standard assuring accuracy and
consistent performance.

The all gear drive transmission on the mill delivers full
power at any speed driving the cutting tools at nearly 100%
of available horsepower and torque.

With such a wide range of versatility and features, this
all-purpose combination lathe/mill is one of the most
function manual machine centers that can operate in all
types and sizes of shops.

COMES WITH PALMGREN 3-YEAR FACTORY WARRANTY!

Scott Machinery Inc
4700 Lang Ave, Suite D McClellan CA 95652-6215
Tel: 916-638-7718 Fax: 916-638-2450
Email (Request Quote): sales@scottmachinery.com
Web: www.scottmachinery.com