MODEL: LMV

TABLE:
Working surface: 9 x 42"
T-slot number, size: (3), 5/8"

CAPACITY:
Table travel; x-axis: 30"
Saddle travel; y-axis: 12"
Ram travel: 12"
Quill travel; z-axis: 5"
Knee travel: 16"
Spindle to column (min-max): 6-3/4 - 18-1/2"
Spindle to nose table: 2-1/8 - 18"

SPINDLE:
Motor: 3 HP
Wiring voltage: 220/440 Volt, 3 Phase, 60 Hz
Taper: R8
Speed (Vari-speed): 60 to 4500 RPM
Quill feed (IPR): 0.0015, 0.003, 0.006"
Head swivel: 360-Degrees
Head tilt; right-to-left (each way): 45-Degrees
Head tilt up-and-down (each way): 45-Degrees

DIMENSIONS and WEIGHT:
Floor area (w x d): 7 x 6.5'
Net weight: 2,400 Lbs.


EQUIPPED WITH:
* POWERFEED ON X-AXIS
* DRO WORKS ONLY WITH X-AXIS (Y NOT WORKING)
* R8 COLLET SET IN RACK
* ONE SHOT LUBE


FEATURES
* Genuine Meehanite castings.
* A pair of high-output fans keep the LMV's powerful 3 h.p.

head cool allowing the LMV to work demanding jobs for

extended periods without damaging the motor, belts or

bearings.
* Spindle runout of no more than 0.0002" T.I.R. A tolerance

unsurpassed in the industry. * The motor shaft * The motor

shaft end VariDrive pulleys are dynamically balances, then

hard-chromed. * Chrome-plated, self-lubricating motor shaft

has an oil channel that's fed by a grease fitting on the

lower end. * Roller bearing for the lower support of the

motor shaft.
* Table and saddle backlash is controlled by a unique double-

nut design.
* Table and saddle are mounted with thrust bearings that pre-

load the feed screw.



IMPORTANT CONDITIONS OF THIS QUOTATION:
All relevant facts about the above machinery are believed to
be accurate, but none are guaranteed. It is the sole
responsibility of the buyer to verify all aspects of the
machine tool, descriptions, specifications, condition, and
suitability of the intended usage. All machines are quoted
subject to prior sale, availability, and buyer verification
of specifications. Typographical and clerical errors are
subject to correction.

Thank you for giving us the opportunity to quote your
machinery needs.

Scott Machinery Inc
4700 Lang Ave, Suite D McClellan CA 95652-6215
Tel: 916-638-7718 Fax: 916-638-2450
Email (Request Quote): sales@scottmachinery.com
Web: www.scottmachinery.com