MODEL: LMV-42

Table:
Working Surface: 9" x 42"
T-Slot Number, Size: 3, 5/8"

Capacity:
Table Travel; X-Axis: 30"
Saddle Travel; Y-Axis: 12"
Ram Travel: 12"
Quill Travel (Z-Axis): 5"
Knee Travel: 16"
Spindle To Column (Min.-Max.): 6 3/4" - 18-1/2"
Spindle To Nose Table: 2 1/8" - 18"

Spindle:
Motor: 3 HP / 220v, 440v / 3ph
Taper: R-8
Speed: 60 - 4,500 RPM (Variable)
Quill Feed (IPR): 0.0015", 0.003", 0.006"
Head Swivel: 360
Head Tilt; Right-To-Left (Each Way): 45
Head Tilt; Up-And-Down (Each Way) : 45

This model has many unique features compared with most of

the other similar machines on the market.

The quill is CNC ground to a mirror finish and chromed to

fit the housing resulting in close to jig bore accuracy for

quill downfeed.

Tapered gibs installed on the ways allows easy adjustment

for long term usage..

The bottom of the saddle, instead of the top of the knee

ways, which rides on the knee, is hand scraped for better

oil retention and prevent dirt and chips from embedded in

the knee ways.

-R-8 spindle, 3 hp , variable speed (60-4,500 rpm)
-Spindle runout of no more than 0.0002" TIR
-Hard chromed ways provide long wear resistance
-Head tilt side to side, up and down
-One shot lubrication with back flow valve
-Tapered gibs for adjustment
-Dual clamps on knee& saddle that locks the knee and table
evenly to the column and saddle to avoid skewing. Handles on
the clamp are adjustable to 12 different positions.


MANY OPTIONAL ACCESSORIES AVAIABLE:

Digital variable speed (DVS) head
Power feeds for table, saddle and knee
R-8 collet set
Milling vise
Clamping kit
Coolant system with chip pan
Right angle milling attachment
Riser block (4", 7")
Digital readout systems
Power draw-bar
Auto lube system
Halogen work light

Scott Machinery Inc
4700 Lang Ave, Suite D McClellan CA 95652-6215
Tel: 916-638-7718 Fax: 916-638-2450
Email (Request Quote): sales@scottmachinery.com
Web: www.scottmachinery.com