Drilling Capacity...................................1" Cast Iron
Tapping Capacity....................................SAE 3/4" Cast Iron
Spindle Bore........................................No. 3 Morse Taper
Diameter Of Column..................................7"
Length Of Arm.......................................3'
Spindle Travel......................................10-1/2"
Diameter Of Spindle Nose............................1-1/2"
Bearing Of Arm On Column............................13"
Traverse Of Arm On Column...........................23"
Traverse Of Head On Arm.............................26-1/2"
Min. Distance Center Of Spindle To Face Of Column...10"
Max. Distance Center Of Spindle To Face Of Column...36-1/2"
Max. Distance Spindle To Base.......................50-3/4"
Min. Distance Spindle To Base.......................18"
Overall Height Of Drill Column......................75-1/2"
Overall Height Of Drill W/Arm Raised In Uppermost Position..93"
Working Surface Of Base.............................45" x 31-1/2"
Height Of Base......................................6"
Floor Space Required................................33-1/2" x 71"
Drill To The Center Of A Circle.....................72" dia.
Rates Of Spindle Feed...............................0.0025, 0.005, 0.0075,
....................................................0.010, 0.015, 0.020
Number Of Spindle Feeds.............................6
Number Of Spindle Speeds W/Single Speed Motor.......9
H.P. Of Main Driving Motor..........................1
H.P. Of Arm Elevating Motor.........................1/3
Net Weight Of Machine(Approx).......................3070 Lbs
*See attached warranty, terms, machine use and safety.
**These specifications are subject to verification upon inspection.
Subscribe to RSS
