SPECIFICATIONS:
TABLE SIZE: 50” X 10”
T-SLOTS NUMBER AND SIZE: 3 SLOTS, 5/8”
SADDLE: 26” WIDE
TRAVELS (X AND Y): 39” X 16.3”
QUILL TRAVEL: 5”
RAM TRAVEL: 18.5”
KNEE TRAVEL: 15.3”
THROAT DISTANCE: 9.8” TO 28.3”
SPINDLE GAGELINE TO TABLE TOP: 5.375” – 16.9”
SPINDLE MOTOR: 5HP
WIRING VOLTAGE: 220 VOLT
SPINDLE NOSE TAPER: NST 40
SPINDLE VARIABLE SPEED DRIVE: 60-4,500 RPM
QUILL FEEED 3 SPEED (IPR): .0015, .003, .005
ACCURANCY: 0.0002” TIR
HEAD TILT (RT. TO LEFT): 90 DEGREES
HEAD TILT (UP AND DOWN): 45 DEGREES
WEIGHT: 3,300 LBS.

FEATURES:
HARDENED AND GROUND BOXWAYS ON SADDLE AND COLUMN
VARI SPEED DRIVE
5 HP MOTOR
#40 SPINDLE TAPER
DUAL COOLING FANS
MEEHANITE CASTING
ABEC-7 SUPER PRECISION SPINDLE BEARINGS
TURCITE-B COATING (X,Y)
CROSS WAY COVER
SELF LUBRICATING MOTOR SHAFT EXTENDS PULLEY LIFE

STANDARD EQUIPMENT:
FROTN AND REAR WAY COVERS
ONE SHOT LUBRICATION SYSTEM
MANUAL DRAWBAR
TOOL KIT WHICH INCLUDES: MANUAL, HALF NUT WRENCH, WRENCH 17M,19M, SET OF 6 ALLEN WRENCHES, PHILIP SCREW DRIVER, FLAT HEAD SCREW DRIVER, OIL CAN, GREASE GUN, REAR WAY COVER BRACKETS, PIN FOR INDICATOR
CAN OF PAINT

INSTALLED OPTIONS:
X AXIS TABLE FEED
Z AXIS TABLE FEED
KURT SWIVEL BASE VISE
POWER DRAW BAR
HALOGEN WORK LIGHT
52 PC. CLAMP KIT
NEWALL 2 AXIS DRO

Technical Machine Sales Inc
717 E Loop 281 Longview TX 75605-8400
Tel: 903-753-1955 Fax:
Email (Request Quote): darah@tmsiusa.com
Web: www.tmsiusa.com