SPECIFICATIONS:
Maximum distance between the outer circumference of column sleeve and the center of the spindle – 60 ½”
Minimum distance between the outer circumference of column sleeve and the center of the spindle – 10”
Maximum distance between the lateral side of the column and the center of the spindle – 58 ¾”
Minimum distance between the lateral side of the column and the center of the spindle – 9”
Maximum distance between the spindle end and the upper surface of the base – 54 ½”
Minimum distance between the spindle end and the upper surface of the base 12 ½”
Stroke of spindle – 14 ½”
Diameter of column sleeve – 13 5/8”
Bearing diameter/quill of spindle – 2 5/8”/ 3 5/8”
Taper of the hole in the spindle – No. 5
Number of steps and speed range of spindle – 12 steps, 30 - 1500 r.p.m.
Number of steps and feed range for spindle – 9 steps, 0.003 – 0.040
Spindle Motor – 7.5 HP
Arm elevating motor – 1 1/3 HP
Motor for the clamping – 1/6 HP
Height of the machine – 91”/ 111”
Usable space of the base – 65 ¼” X 36”
Floor area required by the base – 88 ¾” x 36”
Height of the base – 8 ½”
Distance between the column center and the left end of the base – 13 ¼”
Distance between the column center and the right end of the base – 74 ½”
Distance between the column center and the arm tip – 78 ½”
Dimension of auxiliary table – 78 ½”
Net Weight – 8,800 lbs.

Technical Machine Sales Inc
717 E Loop 281 Longview TX 75605-8400
Tel: 903-753-1955 Fax:
Email (Request Quote): darah@tmsiusa.com
Web: www.tmsiusa.com